0
Wheel and axle.
* Correction - The proper names for a pulley, which is a part of a set of "blocks" include the sheave (the wheel), the axle (supports the sheave which rotates around it), the thimble or terminal (a hook or loop), the cheek (to the side of the sheave), and when it is set up, it includes the line (the rope). Assembling the line properly through the blocks is called "reeving".
Wiki User
∙ 11y ago
Wiki User
∙ 13y agowe have NO IDEA PEOPLE okay try to find cause we don't know.
You must be desperate to know, so let me help you.
a. Have you gone fishing and used a rod and reel. That reel is a complex form of a pulley.
b. Do you drive a car? There are pulleys on the fan, alternator, water pump and Power Steering reservoir and engine crankshaft. Instead of someone pulling on a rope, think of the fan belt as a rope. If you're wondering which of these accessories is doing the pulling; it's the engine, when it's running, that drives the accessories because the belt has sufficient tension.
c. Do you have pull drapes or venetian blinds in your home? Those cords are anchored at one end and strung over small pulleys. As you pull on the cord(s) the pulleys are spinning. If you looked at them closely, you will find that they are like a simple machine - wheel and axle.
d. Do you have a printer for your PC? Within your printer are many pulleys and wire ropes that move various parts as the wheels that feed paper and the ink jets. Don't take your printer apart; just take my word as I have completely stripped an inoperative printer for scrap metal recycling.
e. Now that you have an idea of where to find pulleys in your home, see if you can find some. I hope this has helped you.
Wiki User
∙ 6y agoWiki User
∙ 13y agoIt is in lots of things like a well, clothes line flag pole
Wiki User
∙ 12y agoElevators,boats and cranes have pulleys
Wiki User
∙ 12y agoAn elevator, and a flag pole
Anonymous
I DONT KNOW
Anonymous
door knob
Add your answer:
Earn +20 pts
What are the three parts of a pulley?
The three parts of a pulley are the rope, the grooved wheel, which can also be considered a "sheave" and the weight......The three parts of the pulley are the hub, he rim, and the arms.
What are all the parts of a pulley?
a pulley is a wheel with a groove along with a rope or chain.
Power steering pump pulley?
It takes a special tool to remove the pulley and install the pulley. The tool can be rented from your local auto parts store.
How do you remove power steering pulley 2005 impala?
To remove that pulley with out damaging the pump or the pulley you need a power steering pulley puller. This tool will also install the pulley. Your local auto parts store can rent or sell you that puller.
Ac bypass pulley on 1989 Chevy?
An ac bypass pulley for a 1989 Chevrolet can be purchased at any auto parts store. The cost for the pulley starts at $26.04.
How does the power steering pulley come off a ford ranger?
The pulley needs to be removed before you can extract the pump, you can get the pulley removal tool at a car parts store.
How do you change a bad bearing in a pulley?
In most cases you can purchase the bearing and pulley as an assembly from your local auto parts store.
How do you get the power steering pulley off a 1999 suburban?
It requires a power steering pulley PULLER. You can rent them at some parts stores.
What parts might make a pulley?
A wheel, a groove and a rope/chain.
Which of the following is not a compound machine pulley bicycle?
The bicycle is not a simple machine, there are too many interacting moving parts.
How do you remove the power steering pulley from a 1996 Pontiac Bonneville?
There is a specific tool for this operation. It is a power steering pump pulley puller. This grabs the groove in the end of the pulley and pushes the punp shaft away from the pulley. Available at your parts store.
What is a idle pulley?
idle pulley is a pulley on an engine that does not drive any accesories ,such as water pump or alternator. it is put there to route the belt so as the belt will not hit or rub on other parts or accesories
