It takes a special tool to remove the pulley and install the pulley. The tool can be rented from your local auto parts store.
Begin by removing the power steering pump belt from your 1991 Cadillac power steering pump pulley. Remove the power steering pump pulley retaining bolt. The retaining bolt will be in the center of the pulley.
This requires a power steering pulley puller. This puller is designed to remove and install a power steering pulley without damage to the pulley and or pump. Attempting to do this without the puller will result in damaging the pulley or the pump or both.
How do you put the pulley back on the power steering pump on a 1990 suburban
Power steering belt to crankshaft pulley. Alternator belt to water pump pulley and to crankshaft. A/C compressor belt to power steering pump and to crankshaft pulley. Smog/Air pump belt to water pump pulley. This is for a truck that had a 2 grove power steering pulley, a 2 grove water pump pulley and a 3 grove crankshaft pulley................
It is not possible to remove the power steering pulley on a 1997 Buick Le Sabre without removing the power steering pump.
If you mean the power steering pump pulley, then rent a power steering pump pulley puller tool from Autozone. It does not screw off, the pulley is pressed onto the shaft.
power steering pump failure ----------------------- If it is a Dodge truck then i see alot of Power steering pump shafts that are broken. To test, then pull on the power steering pump pulley - if it pulls out then you have a broken pump shaft.
You need a power steering pump pulley puller tool. This will remove the pulley, so you can get to the other mounting bolts.
Yes. you will have to replace the manual steering box with a power steering box, install a power steering pump and lines and possibly a main pulley on the crank to run the belt for the power steering pump if your car doesn't have the right pulley.
That requires a special PULLER. Need a power steering pulley Puller.
That is not a Allen screw in there. That is part of the pump shaft. If you are looking to remove the pump pulley you will need a power steering pulley puller. This tool will help you remove it and replace it, without the puller you will damage the pulley or the pump or both.
Power steering pumps are belt-driven pumps that use pulley mechanisms attached directly to the pump housings. These pulley mechanisms, which are circular in shape and have small, open grooves machined onto their sides, are driven by rubberized belts that mesh securely with the pulley grooves. These belts are attached to other belt-driven engine components, and are ultimately powered by the spinning motion of the engine crankshaft As the power steering belt turns, which ultimately turns the power steering pump pulley, the power steering pump rotor, which is attached directly to the pump pulley, starts to spin inside the power steering pump. The spinning action of this rotor mechanism is what pressurizes the power steering fluid, and propels it out of the power steering pump unit and into the rest of the power steering pump system. This pressurized power steering fluid provides the lubricating and heat-reducing properties needed to ensure adequate power steering system function.