You should measure the diameter of the bolts concerned. The information I have applies to the 250 cc as well as the 100 cc versions of this bike. For the 10 mm cylinder head bolts they torque to 27 to 31 foot-pounds. The 6 mm head bolts torque from 7 to10 foot-pounds. The 8mm cylinder cover bolt should torque from 15 to 20 foot-pounds. Hope this helps. .
£25.11 = 31 x £0.81
Over Your Head - 2006 2010-07-31 was released on: USA: 31 July 2010
Ed Head died on 1980-01-31.
Follow the top rad hose to the engine , There you will find the housing undo bolts , clean gasket on housing replace with new gasket and thermostat. Make sure engine is cool and drain anti-freeze first
there are 31 grams of sugar in an 8 ounce serving. there are 64 ounces in a 2 liter bottle. 31x8=248 grams of sugar in a 2 liter bottle.
It is 310/1000 = 31/100.
.28 to .31
Pretty Little Head was created on 2006-10-31.
Turk's Head - film - was created on 2010-03-31.
The Phred on Your Head Show ended on 2002-03-31.
According to Haynes Step 1- Tighten 28 to 31 ft lbs Step 2- Tighten an additional 85 to 95 degrees Step 3- Loosen all bolts 360 degrees Step 4- Tighten 28 to 31 ft lbs Step 5- Tighten an additional 85 to 95 degrees Step 6- Tighten an additional 85 to 95 degrees