anything sharp
Oil, Lube, Grease,
The grease or oil will lubricate the two metal surfaces of the hinge, preventing bare metal to metal that will cause the squeak.
because our skin produce oil & grease and it sticks to the surface.
Any, but oils the best.
Coat the surface with grease or oil before storage.
Metal does not slide well against other metal. A layer of grease or oil is added to separate the layers of metal.
They wanted to place an embargo to cut off the supply of oil and scrap metal.
The oil leaves a thin film on a metal surface. This allows the moving parts to come in contact without producing friction which produces heat. It also reduces the amount of metal that is worn away between contact with two metal surfaces.
SA 2Thorough blast cleaning: Commercial finish 65% cleanthe surface shall be free from visible oil, dirt and grease, from poorly adhering mill scale, rust,paint coatings and foreign matter. Any residual contamination should be firmly adhering. SA 2.5 Very thorough blast cleaning: Near white metal 85% cleanThe surface shall be free from visible oil, dirt and grease, from poorly adhering mill scale, rust,paint coatings and foreign matter. The metal has a grayish color. Any traces of contaminationshall be visible only as slight stains in the form of spots or stripes. SA 3 Blast cleaning to pure metal: White metal 100% cleanthe surface shall be free from visible oil, dirt and grease, from poorly adhering mill scale, rust,paint coatings and foreign matter. The blasted surface must have a uniform metallic color.
They wanted to place an embargo on Japan to cut off their supply of oil and scrap metal.
You can wax it, or give all exposed metal a thin coat of grease/oil.
Cilia a sled the wheel oil grease cargo trains a burro