Want this question answered?
sodium
Salts (chlorides) of most metals
hottest part of flame
A meeker burner is like a Bunsen burner in the fact that it uses propane as a fuel source, but there are many differences. A meeker burner burns hotter then a Bunsen burner and it also has a grid over the flame that causes the flame and heat to vibrate as the propane burns.
Equiptment: Bunsen Burner, tripod, Gauze, heatproof mat, basin, stirring rod, spatula, measuring cylinder, Funnel, filter paper, Chemical; CuO+H2SO4First measure 20cm3 of sulphuric acid, H2SO4, using a measuring cylinder and pour it into the beaker.Take 1 spatula of copper (II) oxide and put it into the same beaker.stir the mixture using a stirring rod to ensure complete neutralisation of the acidAdd excess CuO if required.Filter the mixture into a basin.Turn on Bunsen burner but make sure it is on the heatproof mat, and then put the tripod on top of the Bunsen burner followed by the Gauze and basin containing CuSO4.Heat the filtrate until you begin to see crystals forming around the basin.Turn off Bunsen burner and leave to dry.
Yes, you can melt silver with a Bunsen burner. In fact, you can melt any metal using a Bunsen burner, just so long as you have the patience and time! Ribbit! xoxoxoxoxox
Depends on what type of burner you're using and what 'setting' it is on.
dont burn things
No! It is impossible! :D
Bunsen burners are preferred over candles or fires because the Bunsen burner produces a much higher temperature (noted by the blue flame) and it is much easier to contain/control a Bunsen Burner flame.
By using the correct ratio of oxygen and fuel mixture. Opening the air hole in the Bunsen burner increase the oxygen which helps the flame burner hotter .
The Bunsen burner uses an ope flame, making it easier for the alcohol to ignite.
He lost his eye whilst using the Bunsen Burner! I hope he finds it!
The bunsen burner is used to heat items for experiments using a controllable temperature flame and surface area at which the heat is applied to the vessel.
There will be a valve at the bottom of the Bunsen burner. Using a rubber tubing connect the valve to the regulator of the LPG cylinder.
contaminates will be less likely to drip inside the burner this way
sodium