0
hacksaw
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What tool is used to thread steel pipe?
We use a die of the proper size to cut threads on steel pipe. This pipe die can be turned by hand, or by machine. There are examples of this process in any good hardware or large home improvement store. They have pipe threaders on the premises, and they can thread most common pipe stock.
Head loss in a pipe?
when a pump is used to pump a fluid into a vertically arranged pipe , fixed upright; the fluid would reach a certain height at which point the fluid would stop in a pipe. this height at which the fluid has stopped propelling upward could be described as the head of water. this measure relates to the pump power . should a pipe system be used which is less than the head height then fluid will be seen to flow out and over the side of pipe. if the connecting pipe happens to be of longer measurement than the head, and hence when fixed at height is taller than the head height then the fluid will not likely be seen flowing out of pipe . if a pump is mounted within a basement of work hall, but the resulting pressure is utilised on the ground floor of same building then some pressure will be lost when pumping upwards , and could be described as head loss.
What is a mechanical device used to remove health hazards from the workplace?
One mechanical device used to remove airborne health hazards from the workplace is the exhaust ventilation fan, or exhaust system.
What is a tool and cutter grinder used for?
A tool and cutter grinder is used to sharpen tool bits, milling cutters, along with a bunch of different cutting tools. It is a versatile machine that can perform a wide variety of grinding operations.
Applications of venturimeter?
1. It is used for flow measerment with minimum head loss. 2. It is used in industries for flow measerment of chemicals. 3. it is also used in the airoplane for measurment of speed of plane.
What tool can be used to cut an exhaust pipe?
A simple hack saw will get the job done.
Why pipe in pipe is used in exhaust system?
To reduce the noise created by the exhaust gases.
What is a exhaust donut?
A puff of smoke that's in a shape of the exhaust pipe A gasket/seal that is shaped like a donut. They are used between the manifold and the exhaust pipe.
What is a diesel exhaust tip used for?
A diesel exhaust tip fits on the ends of the exhaust pipe. It is mainly a cosmetic piece that comes in different styles to enhance the look of the exhaust pipe.
What is a exhaust pipe used for?
An exhaust pipe is used to excrete the co2 from the gas that has been burned in the engine it is usually snakes to thw back or side of the truck so that it is out of the way. If you get a bigger exhaust pipe than the stock one you can usually get some more power from your engine. You can also get an exhaust kit with a switch the can change the amount of exhaust exiting the pipes.
What is an Exhaust Flange Gasket?
an exhaust flange gasket, is the gasket,commonly called a donut that is used to seal where the exhaust pipe is bolted to the exhaust manifold
What tool used to create pipe threads on the outside of pipe?
diagonal cutting pliers
What is steel corrugated pipe and it's use?
Ribbed, bendable steel pipe used on combustion engine exhaust system.
Can you use a riding lawnmower with no muffler?
Sure you can but put a lot of pipe on it because if not you could burn up your exhaust valve in the engine. You need a little back pressure and that's what the extra pipe should be used for.
What is the name of a Tool used to firm tobacco in a pipe?
A stubber or tamper.
What is the use of pipe?
There are more than one kind of pipe. To which you want to know, is only a guess. A pipe is a tool used for smoking tobacco. It is a tubular device used for liquid flow.
Ancient roman glassmakers used what kind of tool to make glass?
A pipe
