To remove the starter in your 05 Pontiac Grand Am you will need a socket wrench. You will also need a car jack to lift the car so you can reach the starter.
It should be just behind the radiator, you will need to remove the plastic air dam to expose this part. See the following article http://hubpages.com/hub/Starter-Removal-1999-Pontiac-Grand-Prix
In order to wire the starter on a Pontiac Sunfire, you will need a jack, jack stand, socket set, and a torque wrench. You will need to make sure to remove the battery cables from the battery.
no, you do not need a compression tool to remove or replace them
no, you should be able to replace it with out disassembling the whole starter....
most likely your battery is dead or you need a new starter.
You need to remove the rear seat to access the speakers and remove the covers.
you need lots of tools to do that then take it out carefully
jack up vehicle and support it with stands.the starter is on the front of the engine,there are two bolts that hold the starter up.you will need a 15mm socket to remove the bolts. you will also need a 13mm socket to remove the power wire off the back of the starter.then there is one more wire you will need to remove and its an 8mm.just do the reverse to install it
You will need to remove the tire and wheel from your 1998 Pontiac Grand Am. Remove the brake assembly spring from the brake pads. The brake pads will come off. Reverse the process to install the new brake pads.
In order to replace the electric window motors on a Pontiac Grand Prix you will need to unscrew the Torx screws on the door, life it back to remove the plastic pieces. Remove all connectors, and the plastic covers.
you need to remove the top engine mount
No...It will be a little difficult but you don't need to take the solenoid off.