0
What else can I help you with?
Remove radio from 1992 BMW 325i?
One the face of the radio on both the left and right there should be two small flaps that fli[ open. After open use a hex tool to loosen. You may need a special tool if the hex fails. Next pull the radio out and disconnect the wire. Before doing any work on the radio though disconnect the battery.
What sort of instrument or tool does a conductor use to guide an orchstra?
a baton
What does a TPS on a jeep look like?
On my 1991 Grand Cherokee the TPS is a black plastic plug on the back of the throttle body. It is the one the plug goes straight into from the firewall side. The Air Idle Control valve is mounted on the valve cover side of the throttle body with a small plug the plugs in from the driver side. The screws on both are T-20 torx on mine. The TPS screws were installed with green locktite so I had to destroy the sensor to remove them. I replaced them with hex head bolts and lock washers so I wont destroy any more of my torx bits trying to remove them. I didnt use any locktite either. Tip: Remove the entire throttle body to work on TPS and Air Idle valves. It is much easier and a replacement gasket for the throttle body was only $1.99 at Auto Zone.
What are the parts of a banjo?
there are thirteen parts to the banjo those are the tuning keys, the nut , the position markers neck and finger board ,brackets,resonators,the head ,the rim ,the bridge ,the armrest,and the tail piece.
What navigation tool did Francis Drake use?
he of course used a regular old compus
How can I remove a stripped hex screw effectively?
To remove a stripped hex screw effectively, you can try using a rubber band or a specialized screw extractor tool. Place the rubber band over the screw head and use a hex key to grip and turn it. If that doesn't work, use a screw extractor tool designed for stripped screws to grip and remove it.
What is the use of a Philips screwed?
a screwdriver for use with Phillips screws screwdriver - a hand tool for driving screws; has a tip that fits into the head of a screw
What are the best types of screws to use for assembling dumbbells?
For assembling dumbbells, the best types of screws to use are typically hex bolts or socket head cap screws. These types of screws provide a strong and secure connection, which is important for ensuring the safety and stability of the dumbbells during use.
What is the function of a hex bolt?
do you refer to a hexagonal bolt or a hex head bolt one has 6 sides one has 6 points inside the head hex bolt was originally made to replace a 4 sided bolt to make it easier to use hex head were originally made as a secure bolt that could not be removed without e special tool that was not available to the general public do you refer to a hexagonal bolt or a hex head bolt one has 6 sides one has 6 points inside the head hex bolt was originally made to replace a 4 sided bolt to make it easier to use hex head were originally made as a secure bolt that could not be removed without e special tool that was not available to the general public
How can I remove stripped Phillips head screws effectively?
To remove stripped Phillips head screws effectively, you can try using a rubber band or a screw extractor tool. Place the rubber band over the screw head and then use the screwdriver to grip and turn the screw. Alternatively, use a screw extractor tool to grip the screw and turn it counterclockwise to remove it.
How can I remove a stripped hex head screw?
To remove a stripped hex head screw, you can try using a rubber band or a screw extractor tool to grip the screw and turn it counterclockwise. Another option is to use a rotary tool to create a new slot in the screw head for a flathead screwdriver to grip onto. If these methods don't work, you may need to drill out the screw and replace it with a new one.
How can I remove stripped allen head screws effectively?
To remove stripped allen head screws effectively, you can try using a rubber band or a screw extractor tool. Place the rubber band over the screw head and use the allen wrench to grip and turn it. If that doesn't work, use a screw extractor tool to grip the stripped screw and turn it counterclockwise to remove it.
How can I fix a stripped hex screw?
To fix a stripped hex screw, you can try using a rubber band or a screw extractor tool to grip the screw and turn it counterclockwise to remove it. If that doesn't work, you may need to drill a small hole into the screw head and use a screw extractor tool to remove it.
How do you open the weed wacker head for maintenance or replacement?
To open the weed wacker head for maintenance or replacement, first make sure the tool is turned off and disconnected from power. Then, locate the screws or bolts on the head of the weed wacker and use the appropriate tool to loosen and remove them. Once the screws are removed, carefully lift off the head to access the inner components for maintenance or replacement.
What can you use instead of a hex tool?
A pencil with it's tip cut off and flattened.
How can I effectively remove a stripped hex head screw?
To effectively remove a stripped hex head screw, you can try using a rubber band or a screw extractor tool to grip the screw and turn it counterclockwise. Another method is to use a rotary tool to create a new slot in the screw head for a flathead screwdriver to grip onto. Additionally, applying penetrating oil or heat to the screw can help loosen it before attempting to remove it.
What is the best method for removing a stripped hex bolt using a stripped hex bolt removal tool?
The best method for removing a stripped hex bolt using a stripped hex bolt removal tool is to carefully follow the instructions provided with the tool. Typically, you would insert the removal tool into the stripped bolt and turn it counterclockwise to grip the bolt securely. Then, use a wrench or socket to turn the removal tool and extract the bolt. Be sure to apply steady pressure and avoid forcing the tool to prevent further damage.
