Simple: 13m box end wrench. Remove the two nuts on the bottom of the hinge barrels. When you lift the doors up and out of the hinge barrel..have someone help you so you don't drop the door or scratch the paint. Roll window down if you have glass windows and reach through to the other side of the door to the handle. Grab there and at the bottom of the door. Lift up and out of there. Presto. Oh yeah. Don't forget to first remove the door strap!
With a scan tool or a battery disconnect.
The dealer can do that with their scan tool.The dealer can do that with their scan tool.
With a scan tool or with a battery disconnect.
A ratchet isÊneeded to loosen the serpentine belt tension pulley on a 2002 Jeep Wrangler V6. It will require a 1/2 inch ratchet.
After fixing the cause of the trouble code, you clear code with a scan tool.
The distributor is set to 0 degrees with a scan tool. You cannot do this with a timing light.
Timing is not adjustable. The distributor or cam sensor is synched to the crankshaft sensor with a scan tool.
A Wrench!! takes awhile and it is cramped but that is the way to do it!
That will require a scan tool after the cause of the code has been repaired.That will require a scan tool after the cause of the code has been repaired.
Should be under the front passengers seat along with the jack. Look under the passenger side carpeting for extensions for the jack...
There is usually a snap ring underneath of a cover right behind the handle. You need to take a small tool (and a pen light to see it) to push the legs of the snap ring. Usually if you can get it started and use a hook tool on the other side, it will come off pretty easily.
You reset it with an OBD2 scan tool after repairing the problem detected by the computer. Otherwise it will just come back on.