it depends on which filter you have. sometimes you need only a screwdriver but sometimes you need line wrenches
no
You don't need any. You should be able to replace its fuel filter with a screw driver and pair of pliers.
is a special tool needed
the filter is on the frame rail and there is a special tool to release it
Passenger side rear just before the rear axle on the inside of the frame. It has two quick disconnect on the filter. The only tool needed to replace is a wrench to unscrew the filter from the frame.
Changing a fuel filter on a Ford Falcon BA 6 cylinder involves purchasing the correct new filter needed to replace the old one. You need the correct tools including a fuel filer removing tool. The filter is under the car next to the fuel tank. Remove the old filter using the tool and put the new one in.
Oil in an air filter is commonly caused by a bad PCV filter. Check the filter, and replace as needed.
4 Liters when you replace the filter. Always replace filter when you change the oil.
Replace the plugs: change the oil and filter. Check the air filter and replace if needed. Replace the fuel filter if it is more than 25,000 miles or 5 years old. That's about it!
The fuel filter is located on the driver's side of the frame and will require a special tool to replace it.
The fuel filter is located under the car on the frame just forward of the gas tank. It will require a special tool to remove the filter.
twist it counter clockwise. A oil filter remval tool may be needed