a vibrator
The lug/wheel bolt pattern for the 1986.5-1992 Toyota Supra (Mk III) is 5 x 4.5"
bolt pattern for 1993 toyota celica starter
The wheel bolt pattern for the 1993 Toyota Supra is 5 x 4.5 inches or 5 x 114.3 millimeters. The stud size is 12 x 1.5 and the offset is high positive.
when i did the clutch in my 1988 non turbo supra we had to take off the starter it was a pain it took us six hours just to get the one bolt off we tried using extension and everything we finaly got it off by going the inside of the car through where the gear shifter is put a couple extensions on it have one person hold it on the bolt and the other go at it with an impact driver by far the most difficult job i ve done on my car is that one starter bolt good luck
The bolt pattern is 5x114, but I dont know the offset of the stock rims.
13mm
Stock is 16x7 inches, 5x114.3mm bolt pattern (5x4.5 inches), +37mm offset. -Jeff Lange- from Supramania
Hello, I have a 96 Toyota Tercel that has a starter that is not working. I am having a difficult time finding any answers about the top bolt which holds the starter on the engine. I got every bolt off except for that mysterious top bolt. I have never seen anything quite this difficult before. I will try to answer when I find the solution.
It depends if you are talking quarter mile or long run. i believe that the supra with mild bolt ons will smoke most corvettes except the brand new ones.
You should either deal with it or check eBay/Toyota for a replacement. They are available from the dealer.
1985 Supras (MA67 body style) use a 14" wheel with a 4 x 114.5 bolt pattern. The offset is +7mm
most crankshaft pulleys have a left hand thread. this means it turns opposite direction or clockwise to remove