If it is a 1.9L it takes a box or open end wrench in 10mm to take the 2 bolts off in the center of the valve cover.
using some c clip tools at walmart in car audio
No, normal mechanics tools.
Normal metric mechanics tools. No special tools are needed other than what any mechanic would own.
you have to remove the drivers side tire, remove several screws that hold the plastic cover in place, behind the cover is the battery. It is held in place with a battery strap, use a 5/16 wrench to undo the battery terminals. wiggle the battery out the hole.
Tools needed to remove the 2005 Tahoe front bumper are 10 mm and 7 mm panel poppers.
There are two tools needed to remove a front hub from a 2003 Frontier. These include a screwdriver and a cone wrench.Ê
The tools needed for an oil change tend to be common tools. A floor jack is needed to access the oil pan. A pan which is used to drain oil into. A wrench and socket set is used to remove and replace the oil cap.
Open the tailgate. Remove the cargo net.The tools and jack are behind a cover in the cargo area on the driver's side. Remove the cover by turning the handle counterclockwise, then pulling out the cover.Take the tools out of the storage compartment.Turn the jack's end bracket counterclockwise to loosen it, then remove the jack.
use your hands.
It is illegal to disable the check engine light.
Just a Ford retainer ring tool. They're relatively inexpensive at auto parts stores.
You need special tools to remove the clutch, only a dealer or a/c repair shop has the needed tools to do the job. ( Besides the know how to do it correctly )