I'm not familiary with The Odyssey, but you'll need a metric wrench (I don't know what size, though, but it'll be metric.. 13mm or 15mm are the likely sizes), and a slotted screwdriver (to separate the ring terminals from the posts).
Is the timing belt on a j30 infinity run the alternator
Wrenches: 10 mm, 12mm and 14 mm.
Common mechanics hand tools. Sockets, ratchets, open & boxed end wrenches. More than likely metric.
you need to replace the alternator
the alternator will be located close to the top of the motor, you will need to loosen the tensioner pulley and remove the serpentine belt, disconnect the elictrical connections at the alternator and remove the alternator mounting bolts. then just lift the alternator out... as far as tools you will need a basic set of sockets and a screwdriver.
whats tools do i need to replace my rear struts on my 95 camaro
It is integrated into the alternator, if it is bad you will need to replace the alternator.
I need a step-by-step how to change, remove and replace an alternator in an 1996 Nissan maxima
hallo how need replace alternator belt and tensionier on peugeot 307 hdi manual?thanks
it means your alternator is probably gone, and u need to replace it
2002 vw beetle alternator what size sockets do i need to do the job?
You will need to remove the alternator belt. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.