Transmission Fluid
Late Model 1979-New Ford Mustangs

What tranny fluid to use on 98 mustang v6?


Top Answer
User Avatar
Wiki User
2010-04-01 21:42:45
2010-04-01 21:42:45

For the manual transmission ( Motorcraft MERCON automatic Transmission Fluid )

For the automatic transmission ( Motorcraft MERCON - V - automatic transmission fluid

According to the Owner Guide


Related Questions

There is a bolt under neath the tranny. take it out and drain the fluid. ATF fluid 2.6 quarts is the capacity of the tranny

take the bolts out of the tranny fluid pan and drop the pan, change the filter and then put new gasket on the tranny pan and reinstall the pan with the bolts and then refill the tranny with new fluid.

low tranny fluid. transmission may need rebuild.

A 3.8l thunder bird engine would fit or another v6 mustang motor but it has to have the same nolt pattern for the tranny I think 95 to 98 v6 models have the same bolt pattern

I have a 98 cavalier and its tranny is yes.

96-98 3.8L mustang engines are the same.

How do you bypass antitheft system on 98 ford mustang

Motorcraft MERCON - V - automatic transmission fluid ( I believe it is stamped into the automatic transmission dipstick )

5 w 30 ( according to the 1998 Ford Mustang Owner Guide )

can u put a tranny from a 98 Honda civic lx in to a 97 Honda civic dx

In the 1997 Mercury Villager, the Transmission fluid dipstick is located on the driver's side of the engine just in front of and below the master cylinder/brake fluid check. The 97 Villager has a bulbous knob on top with no indication that it is the Transmission fluid.

According to the 1998 F150 owners manual , the 5 speed manual transmission takes Motorcraft MERCON automatic transmission fluid ( YES , ATF ! )

Will a tranny from a 2001 corolla fit a 98 corolla

5 W 30 - according to the owners manual

CaN I add transmission fluid on 98 Mercedes

If the 1998 is a Civic then yes it will fit.

I got 2 gallons of transmission fluid... Use one gallon then keep checking the dip stick for the fluid to rise.

Yes. 98 explorers came with 302's.

the correct psi for a '98 to '08 mustang is 31 psi

The P1151 code on a 98 Mustang means that the heated exhaust oxygen sensor is not working properly. Once this is replaced, the code will go away.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.