Case recommends regular 10W30 oil along with an HTO additive they sell at Case. It takes about 6 gallons of oil mixed with 1 quart of the additive. I've been running that mix in my 1818, and it has been working just fine.
The hydraulic fluid capacity of Case IH MX 170 tractor is 25.5 gallons. It's important to use enough fluid or the transmission could be damaged.
In any general application, hydraulic fluid is contained inside a system consisting of pumps, actuators, and hoses. The hydraulic fluid is not actually consumed, except in the case of leaking fluid or a fluid change.
The manual says 8 quarts or 7.6 liters of case TCH fluid ,you can use Hy-tran Ultra hydraulic fluid. I use the hydraulic transmission fluid from tractor supply and have no problems.
how transmission oil capacity
Automatic Transmission Fluid Type "F"
64 Quarts with both filters changed.
any hydraulic transmission oil such as Hy-tran Case IH or Hy-Gard John Deere
It does not use brake fluid. It uses TCH hydrulic fluid. Brake fluid will swell the origs in the brake piston and either lock them up or leak into the trans axle causeing damage to the transaxles.
Looking at the back of the tractor. On the left hand side above the PTO
Look for a hinged panel between the loader uprights. That is where the hydraulic reservoir fill port is located. Lift the hood for better access.
Hydraulic fluid could be used in two locations on your 1993 saturn. your brake system is of course Hydraulic, in this case, the easiest way to change the fluid is to obtain a vacuum brake bleeder kit from your local parts store. you will need to loosen each bleeder screw on all 4 wheels and attach the vacuum bleeder. keep an eye on the fluid level in the master cylinder so it doesnt get too low. 1 large bottle of brake fluid is enough to do an entire vehicle. If you are talking about the clutch fluid, which is also hydraulic, there is no method of changing the fluid. the unit is sealed and offers no bleeder.
William Case was born in 1818.