Want this question answered?
the red wire and the blue wire A touching of two wires coming from any potential power source will cause a short circuit Short circuit relates to the quickest path back to the source with out any resistance to the current flow.
The correct name is a Short Circuit.
A straight 220V circuit utilizes two wires per circuit.
If the live and neutral wires come into contact the circuit is completed and a current will flow. Since there is no appliance in the circuit and the resistance in the wires is low the current will rapidly rise to high levels. Typically a safety device, a fuse or circuit breaker, will then react and stop the current flowing. The reaction speed of the safety devices is normally not quick enough to prevent a shower of sparks (molten metal) and melt damage to the wires where they touched.
They complete the ckt. Without wires/conductors of some sort, we couldn't connect all those other parts.They are connections between other parts of the circuit such as light bulbs, buzzers, etc. The wires carry the electricity through them to the light bulbs, buzzers, switches, etc on the circuit.
A short circuit is a condition whereby a point or section of the circuit offer a short path for current to return to the power supply. It occurs when two or more points or sections of the circuit touches each others (but only and only if that results in drop in resistance to such an extent that it causes excessive current to flow through.
Because of the risk of electric shock to people touching it ! It also guards against two wires touching each other - causing a short circuit.
the red wire and the blue wire A touching of two wires coming from any potential power source will cause a short circuit Short circuit relates to the quickest path back to the source with out any resistance to the current flow.
If you want to physically do it, connect up a simple circuit with wires, a battery and a small bulb. Put the object in the circuit (touching the wires) - if the bulb light, its a conductor.
A circuit breaker is designed to 'break' in a circuit if a short circuit (or other malfunction) occurs. This prevents overheating (or burn-out) of the circuit wires. In older systems, you would need to find which fuse wire has fused and replace it. In a circuit breaker, once the fault has been found and corrected, the breaker is simply switched back on.
A short circuit usually occurs when the insulation between wires breaks down and they become accidentally connected together.
1. That if a short circuit occurs we will get a sign before short circuit will happen or not ? 2. what we can do ? 3. how fuse can get a short circuit ? 4. which wires we have to use from preventing short circuit ?
You have a short circuit/over current problem with the circuit. If the wires are not touching metal, then the starter may have failed.
usually it's down to a short circuit, wires touching etc. or the fuse could be under rated.
The point where wires interconnect with other wires is known as a "junction". In your panel the circuit breakers are connected to the buss, each circuit breaker feeds a different circuit. Different circuits are not connected together.
plastic or rubber is on the outside of an electrical cord or circuit so that you do not get shocked. rubber and plastic help to repel the electricity, while if you were just touching plain wires, they would shock you.
Something that contains a voltage circuit and wires.