Either SCSI or IDE (PATA).
cable modem
cable modem
To maintain the connection with your computer, the ethernet cable must remain connected to the system. If this is not an option, check to see if your computer has 802.11 Wi-Fi built in. If so, you can first connect the computer to the network via Wi-Fi by accessing your network connection settings.
You have to have a special cable which is "cross connection cable" or something like that.
Typically, one of three ways: An ethernet cable, which is the most common. Merely connect an ethernet cable to your computer and the router. A USB cable, less common. Same connection. A Wireless system (WiFi), becoming widespread. Requires WiFi antennas on both the router and the computer.
restart the compuer or replug the cable or replug the USB cable
The Cable Connection lets you share files with other computers. Also a printer can be shared by using certain ports on the computer or by the use of a cable.
rj11 cable is usually used for a phone line so for computers this particular cable can be used to connect to a dial up connection or dsl connection
'Yellow' is descriptive but does not identify the cable. A description of the ends of the cable would be helpful. However, if your computer is connected to the network then the yellow cable is unnecessary. It may be a management cable or an alternative connection. If your computer is not connected to the network then it is likely that the yellow cable is the rj-45 connection and that you need to install a network card for your computer.
The use of cables for the internet is very simple. The cable provides the connection between an internet connection and a computer. Nowadays, wireless connection is more common.
It depends on the internet system whether it is wireless system or wire system. If it is a wire system then you have to plug the internet cable into the computer.
You can download from the computer to a phone either by a Bluetooth connection, or by a USB cable.