First of all, you don't use R12. Rather, R134 which has the oil included.
read sticker on A/c unit should be there Rick ASE L-1 MAster TransMichigan.com
If you mix r12 with r134 air conditioning system, it will cause a high pressure in your airconditioning system and eventually damage the compressor and the evaporator. R12 is only for r12 aircon and something with r134, it can't be mix.
Yes!
if your uing air tools on the compressor then you will put one or two drops directly into the inlet where you connect the compressor hose
Yes if the compressor has oil in it, drain it out and measure what comes out. A good general rule is about 3-5 oz to put in the new compressor. Make sure to put it directly in the suction side(low side) of the compressor and turn it about 10 times .
You should not put any oil in a Ford air conditioning compressor. The air conditioning compressor runs on Freon. The system should take about one pound of Freon.
Compressor lubricant is mixed in with the freon and will enter the system when it is recharged
Put a dye type refrigerant and watch for leaks at fittings, hoses, and compressor Put a dye type refrigerant and watch for leaks at fittings, hoses, and compressor Put a dye type refrigerant and watch for leaks at fittings, hoses, and compressor Put a dye type refrigerant and watch for leaks at fittings, hoses, and compressor
If you only replaced the compressor, 2 to 3 ounces.
how much ac oil do i put in my ac copressor
Yes, Because it won't work right if you do not oil.