i dont know but if you find one could you let me know
as i have this turntable and i am looking for the amplifier
gerry
The main piece of information needed is the load wattage or amperage that will be connected to the power supply. Once this is known the power supply of a greater size that the load should be chosen. Also with this information the size of the wires can be calculated from the power supply to the load. Too small a wire will create a voltage drop at the load end of the circuit. This will cause under performance of the load.
You can measure the current and power of a 'power supply', using an ammeter and a wattmeter. With the power supply connected to its load, the ammeter must be connected in series with the power supply's input. The wattmeter's current coil must also be connected in series with the power supply's input, and its voltage coil must be connected in parallel with the supply, taking the instrument's polarity markings into account.
variable dc supply are used to get desired amount of dc supply
More information needed - is it a network cable (ethernet) or a 2-phase power supply (unlikely) . .
infact i think the power supply be replaced with new one. infact i think the power supply be replaced with new one.
Power supply units are rated based on their output and efficiency. When more equipment is connected, a higher output power supply is needed.
No No No. If your supply can give .2A, and you need 2 Amps, your supply's not going to cut it.
The power supply that is needed for a wireless microphone would be a rechargeable battery. Batteries such as these could be purchased at Amazon or Full Compass.
Any standard ATX power supply will work great with the Sun 9641A.
+5v supply is alone needed for Intel 8085 Microprocessor
A computer's power supply unit provides all needed voltages for the components of a computer that are internal. Externals either draw power from the USB bus (which in turn gets it's power from the aforementioned PSU or a Hub with a power supply) OR have their own internal power supply with a cable.
Load forecasting is used by power companies to anticipate the amount of power needed to supply the demand.
The main piece of information needed is the load wattage or amperage that will be connected to the power supply. Once this is known the power supply of a greater size that the load should be chosen. Also with this information the size of the wires can be calculated from the power supply to the load. Too small a wire will create a voltage drop at the load end of the circuit. This will cause under performance of the load.
To know what size power supply you need, add up the wattage requirements of all components and add 30 percent.
In short, no. The power supply takes the alternating mains voltage and reduces it to the low voltages and direct current needed by the components of your PC.
A Consort EV 265 power supply may be reading low current and power if the capacitors are failing. They will be unable to provide the needed power and operate consistently.
The average price of a 12v power supply depends on the item for with the power supply is needed. Universal AC/DC adapters can be as little as a few dollars, to branded items with is dependent on the manufacturers pricing structure.