distilled water and antifreeze - usually 50/50 mix - up to 60 % antifreeze in cold climates for Ford Vehicles
50/50 mix of water and coolant is recommended.50/50 mix of water and coolant is recommended.
The best reason to use water as a coolant is because is because it has a high specific heat capacity. However, you can add a mix of antifreeze with your water.
you always should mix coolant with water if it is full coolant. most coolant today says 50/50 on the package and is pre mixed in which case no, but if it is straight 100% coolant, yes mix with water.
It is usually best to add the correct mix of antifreeze and water (usually 50/50). In a situation where there is no antifreeze available, yes, add water, then check the coolant later to see if the mix is adequate, and adjust the mix if necessary.
50/50 mix. 50% correct type antifreeze and 50% distilled water. Do not use tap water.
A 50/50 mix of water and antifreeze
A 50/50 mix of distilled water and Dexcool antifreeze.
A good quality antifreeze mixed 50/50 with water
The Commodore requires a gycol based coolant, its uses a50% coolant, 50% water mix. Ensure the coolant you choose is a high quality and suitable for V6 motor
Antifreeze should be a 50/50 mix with water. If you bought pure coolant, mix with water. If you bought premix (already 50/50) pour in straight.
Most of them are ethelyne glycol mix (the green stuff). It's normally a 50/50 mix with tap water unless you live in extreme conditions.
It really is best to get the pre-mix from your Honda dealer. Can't go wrong with this.