The transmission type is 4L60E
Yes it will if the 87 is a 4-wheel drive truck transmission. And that is if your 76 blazer is a 4x4 too. 2-wheel transmissions and 4-wheel transmission will not interchange with each other. The center shafts in the trans. are 2 different sizes.
You can get a Chevrolet transmission wiring diagram for a 97 S-10 Blazer from the dealership. Other options include your local library, book store, or auto parts store.
AnswerThe Transmission, in my 1992 S-10 Blazer Four-wheel drive, with the 4.3 V-6, came out of a 1996 S-10 Blazer w/FWD. I had no problems with the installation, other than having to jack the body up, to get the Engine and Transmission out. it will fit. but the computers have two different style processors so after you put it in you will find that it doesnt work
The S10 Blazer, the S10 pickup, the GMC Sonoma, the GMC Jimmy, the Oldsmobile Bravada.
First Gen teggy transmission will match up. They are the best bet as far as gear ratios. you will also need the cv axles and clutch from a teggy. Very hard to find otherwise any other transmission that is Honda will for that year will match up.
It is a 4L60E transmission. the 94 model had 2 different 4L60E trans, one has a GM option code (CTF) and the other one doesnt.
No the bell housings won't match each other.
No they do not. There is a seal between the transfur case and transmission to stop the transfur of fluid from 1 to the other.
Yes, AS LONG AS BOTH ARE EITHER FULLSIZE OR IF BOTH ARE S10/S15 TYPE BLAZERS. NO IF ONE IS S10 AND THE OTHER IS FULL SIZE.
the blazer or jimmy hub and bearing assembly should work on your 96 bravada they are basically similar vehicles
1983 to 04 S-10, S-15 BLAZER, JIMMY, SONOMA,1955 to 1988 Chevrolet/GMC ALL MID & FULL SIZE RWD,
NO. You will have to remove the transmission bolts and move the transmission back alittle after you have removed the driveshaft,transmission lines,crossmember bolts,starter,flywheel dust cover,front driveshaft,torque converter bolts. NO OTHER WAY.