The ignition is turned on and off with the vacuum line. If the vacuum line leaks or gets plugged, the engine won't turn off. Then you'll have to open the hood and push the red "Stop" lever on the engine.
To replace the ignition switch on a 1982 Mercedes 300SD, disconnect the battery and remove the horn pad. Locate the wire behind the horn and remove.
On the Cummins diesel the crank sensor is located in the side of the block under/behind the starter.On the Cummins diesel the crank sensor is located in the side of the block under/behind the starter.
The engine computer (behind the battery) is the ignition module.
Behind the rear seat.
Behind the front grill of course.
Behind the flywheel.
On top of the steering column, behind the dash.
it is located behind the coil packs
The oil filter on a Mercedes A160 is located behind the valve cover next to the fire wall. It is located in a metal cylinder with a black plastic top.
If you are talking about a 1984-1987 Ford Escort diesel in the USA, it is located behind the left side trim panel in the trunk/hatch area.
behind the engine.. near to the windshield.
It is located in the side of the block, behind the starter.