0
Add your answer:
Earn +20 pts
How do i determine what year my john deere 90 skid steer is?
Take the serial # off of the right rear side of the engine. Call your local John Deere dealer and give thewm the serial # and they can tell you the year. I believe the 440B was made from 1972-1976. 1972-1974 were not turbocharged 1975-1976 were turbocharged!
What is value of savage 440B 12 gauge over and under shotgun?
The Savage 440B 12 gauge over and under shotgun is valued at $700 in excellent condition. In fair condition, it is valued at $300.
Is Kepler a planet?
No. Kepler is a telescope created to find planets orbiting other stars. Planets found using it are given designations beginning with Kepler, such as Kepler 440b.
Is Aus-8 a good knife steel?
The answer is yes and no. Depends what type of knife and its designated use. In general AUS8 or AUS-8A, which is alternate name form the maker to state "annealed" product is a decent stainless steel and works best for small/medium knives used for light cutting. In other words that is not a good steel for the large knives, swords etc. Made by Aichi steel (Japan), similar to AISI 440B steel. Exact chemical composition and comparison with 440B and other related info in the links.
Workstoff 1.4112 equivalent?
DIN X 90 CrMoV 18 NF - AISI 440B SIS2319 BS - EN X90CrMoV18 Chemically Specifications C S Cr Mo Vanadium Fe WS 1.4112 0.85-0.95 0.03 Max 17.0-19.0 0.90-1.30 0.07-0.12 Rem x 90 CrMoV 18 0.85-0.95 0.03 Max 17.0-19.0 0.90-1.30 0.07-0.12 Rem AISI 440B~ 0.85-0.95 0.03 Max 17.0-19.0 0.90-1.30 0.07-0.12 Rem
How much water does the planets have?
There is no single planet named Kepler; rather Kepler is a prefix added to the designations of planets discovered by the Kepler telescope. Several planets discovered by Kepler, including Kepler-438b, Kepler-442b, Kepler 440b, and Kepler 296f, orbit in the habitable zones of their stars, which means they might have liquid water on their surfaces. Currently we do not have the technology to determine if they actually have liquid water.
How much water does Kepler the planet have?
There is no single planet named Kepler; rather Kepler is a prefix added to the designations of planets discovered by the Kepler telescope. Several planets discovered by Kepler, including Kepler-438b, Kepler-442b, Kepler 440b, and Kepler 296f, orbit in the habitable zones of their stars, which means they might have liquid water on their surfaces. Currently we do not have the technology to determine if they actually have liquid water.
What is the distance between Boise and New Orleans?
2,208 miles taking this route:Take I-84 EAST from Boise to I-80 EAST to CHEYENNE at END I-84 in UTAH.Take I-80 EAST to I-25 SOUTH to DENVER off EXIT 359A in Cheyenne, WYOMING.Take I-25 SOUTH to I-70 EAST to LIMON via E-470 (tollway). [EXIT 228 off I-25 to get onto E-470 (tollway); EXIT 20 off E-470 (tollway) to get onto I-70, follow signs to I-70 EAST to LIMON.)Take I-70 EAST to I-135 SOUTH to WICHITA off EXIT 250A in KANSAS.Take I-135 SOUTH to I-35 KANSAS TURNPIKE (toll) via I-235 around Wichita (EXIT 11B off I-135; follow signs to I-35 KANSAS TURNPIKE).Once you are at I-35 TURNPIKE, follow signs to I-35 SOUTH to OKLAHOMA CITY.Take I-35 SOUTH to I-35E SOUTH to DALLAS at the split off. Take I-35E SOUTH to I-20 EAST to SHREVEPORT via I-635 EAST (EXIT 440B off I-35E to get onto I-635 EAST; EXIT 1C off I-635 to get onto I-20 EAST to SHREVEPORT).Take I-20 EAST to I-49 SOUTH to ALEXANDRIA via LA-3132 - BYPASS around Shreveport. (EXIT 11 off I-20 in LOUISIANA to get onto LA-3132 - BYPASS; EXIT 7 off LA-3132 to get onto I-49 SOUTH to ALEXANDRIA.)Take I-49 SOUTH to I-10 EAST to BATON ROUGE.Take I-10 EAST to New Orleans.
How long is the flight from Denver Colorado to Panama City Panama?
1,710 miles taking this route:Take I-70 EAST (towards LIMON), from Denver, to I-135 SOUTH to WICHITA off EXIT 250A in KANSAS.Take I-135 SOUTH to I-35 KANSAS TURNPIKE (toll) - SOUTH to OKLAHOMA CITY, near Wichita.Take I-35 SOUTH to I-35E SOUTH to DALLAS at the split-off in TEXAS; continue on I-35E SOUTH to I-20 EAST to SHREVEPORT, via I-635 EAST to bypass DALLAS, TX (EXIT 440B off I-35E to get onto I-635 EAST ; EXIT 1C off I-635 to get onto I-20 EAST to SHREVEPORT).Take I-20 EAST to I-49 SOUTH to ALEXANDRIA, via LA-3132 EAST to bypass SHREVEPORT, LA (EXIT 11 off I-20 in LOUISIANA to get onto LA-3132 EAST to ALEXANDRIA ; EXIT 7 off LA-3132 to get onto I-49 SOUTH to ALEXANDRIA).Take I-49 SOUTH to U.S. 190 EAST to BATON ROUGE off EXIT 19, near Opelousas.Take U.S. 190 EAST to I-12 EAST to HAMMOND, via I-10 EAST at Baton Rouge (EXIT 159 off I-10 to get onto I-12 EAST), which you will connect to via LA-415 SOUTH (west of Baton Rouge).Take I-12 EAST, around New Orleans, back to I-10 EAST to BAY ST. LOUIS off EXIT 85C.Continue on I-10 EAST to FL-77 to PANAMA CITY off EXIT 120 in FLORIDA; turn right off the exit ramp onto SR-77 SOUTH to PANAMA CITY.Take SR-77 SOUTH to Panama City, FL
How many miles are there from Vancouver BC to Miami FL?
3,675 mile (5,915 km) taking this route:Take HIGHWAY 99 SOUTH from Vancouver to U.S.A. You will be crossing at the PEACE ARCH X-ING.Cross the border from DOUGLAS, B.C., CANADA into BLAINE, WASHINGTON, U.S.A.From there, continue SOUTH on I-5 to I-90 EAST to SPOKANE via I-405 SOUTH to bypass SEATTLE (EXIT 182 off I-5 to get onto I-405 ; EXIT 11 off I-405 to get onto I-90 EAST to SPOKANE).Take I-90 EAST to I-82 EAST to YAKIMA off EXIT 110 near ELLENSBURG.Take I-82 EAST to I-84 EAST to PENDLETON in OREGON, near HERMISTON/ UMATILLA.Take I-84 EAST to I-80 EAST to CHEYENNE at END I-84 in UTAH.Take I-80 EAST to I-25 SOUTH to DENVER off EXIT 359A in CHEYENNE, WYOMING.Take I-25 SOUTH to I-70 EAST to LIMON via E-470 (tollway) around DENVER [EXIT 228 off I-25 in COLORADO to get onto E-470 (tollway), follow signs on the exit ramp to E-470 (tollway) SOUTH to LIMON ; EXIT 20 off E-470 (tollway) to get onto I-70, follow signs off the exit ramp to I-70 EAST to LIMON].Take I-70 EAST to I-135 SOUTH to WICHITA off EXIT 250A in SALINA, KANSAS.Take I-135 SOUTH to I-35 KANSAS TURNPIKE (toll road) via I-235 SOUTH (EXIT 11B off I-135 to get onto I-235 SOUTH) to bypass WICHITA. Once you are at I-35 KANSAS TURNPIKE, and, once you are past the toll booth, follow signs to I-35 SOUTH to OKLAHOMA CITY.Take I-35 SOUTH to I-35E SOUTH to DALLAS at the splitoff north of the Metroplex in TEXAS. Continue on I-35E SOUTH to I-20 EAST to SHREVEPORT via I-635 (EXIT 440B off I-35E to get onto I-635 EAST) to bypass DALLAS, and via U.S. 80 EAST (EXIT 6B off I-635) as a shortcut to I-20 EAST.Take I-20 EAST to I-49 SOUTH to ALEXANDRIA via LA-3132 EAST to bypass SHREVEPORT (EXIT 11 off I-20 in TEXAS to get onto LA-3132, follow signs to LA-3132 EAST - TO ALEXANDRIA ; EXIT 7 off LA-3132 to get onto I-49, follow signs on the exit ramp to I-49 SOUTH to ALEXANDRIA).Take I-49 SOUTH to U.S. 190 to BATON ROUGE and OPELOUSAS off EXIT 19.Turn left off the exit ramp, then follow U.S. 190 (Airline Hwy) EAST to I-12 via LA-415 SOUTH (near Port Allen, which is west of Baton Rouge) and I-10 EAST towards BATON ROUGE (EXIT 169 off I-10 to get onto I-12 EAST towards HAMMOND.Take I-12 EAST back to I-10 EAST to BAY ST. LOUIS off EXIT 85C in SLIDELL.Take I-10 EAST to I-75 SOUTH to TAMPA off EXIT 296A in LAKE CITY, FLORIDA.Take I-75 SOUTH to Florida's TURNPIKE (toll) SOUTH to ORLANDO off EXIT 328.Take the TURNPIKE (toll) SOUTH to MIAMI via I-95. FOLLOW SIGNS.
What is the best grade of steel on knife?
There isn't a singular "best" steel for knives as it depends on various factors such as the intended use, budget, and personal preference. However, high-quality stainless steels like VG-10, S30V, and 154CM are popular choices due to their excellent balance of durability, edge retention, and corrosion resistance in knife making.
What is the sharpest knife in the world?
If one uses chef's knife for its designated purpose, i.e. vegetables, meat and other soft food, then definite winners are Japanese chef's knives. They are lighter, thinner, i.e. less exhaustion during prolonged use. Plus, Japanese kitchen knives typically are made using better and harder steel, e.g. VG-10 or better vs. X50CrMoV15 steel or worse in mainstream western kitchen cutlery. All that allows for thinner and much better cutting edges on the Japanese kitchen knives vs. wester ones. Masamoto, Hattori, Tadatsuna, Koncuke, Togiharu, Watanabe, Takeda are some of the best known makers. From western world Henckels and Wusthofs are perhaps the most widespread and better known. Messermeister is another German brand and their knives are slightly better and the steel they use is also slightly better thanHenckels and Wusthofs - X55CrMoV15. American company Chef's Choice produces Trizor line of kitchen knives that are very good compared to mainstream. As for the Cutco, who's knives are distributed by Vector marketing, their claims are very far from true. 440A steel used by Cutco is the worst performer in 440 steel group(440A, 440B, 440C). It's rather old, and cheap stainless steel which is used in low end knives in knife industry, or diving knives. At any rate, it doesn't provide edge holding Cutco claims and in fact it is way behind modern Japanese knives and worse than German knives. D edge used on Cutcos is serrated edge, unfortunately its configuration makes it impossible to sharpen it at home. There is no steel that will not need sharpening for 10 years as Cutco and their marketing claim, and sending your knives to maker few times a year for sharpening is not realistic. As for the full tang, tripple rivets and bolster, it is all marketing hype, designed to promote and sell features that nobody really needs. Detailed explanation of the knife marketing myths in the attached link.
