0
£25 to £400 all dependant on quality.
Rod Fathers
Add your answer:
Earn +20 pts
How do you adjust taymor door closer 55h5?
I need a universal door closer 55h5
How do you adjust closer so door wont hit wall?
Adjust the length of the arm or move the door closer.
How to fix Hydraulic door closer?
My door slam to hard.
How do I get a steel door with a 97y7 door closer to latch?
Check out Midlands Floor Springs blog.
What is the Difference between door checks and door closers?
the terminology of door check and door closer are from long ago, in 1880's and 1890's door closers were just a spring device to pull the door shut but not really control the closing speed or force, door check, that was more of a hydraulic or pneumatic cylinder with a piston inside (think of a regular screen door closer, but without the spring) was used together with a door spring to create some controlled door closing, and prevention od door slamming. now, the term of door check is faded because after the rack and pinion hydraulic closer was invented, the dampening effect was added onto the device in the manufacturing process. hence now they are all referred to as door CLOSER. hope this helps, expert in closers here
Is a door a complex machine?
no.but it is a lever, the closer you push a door toward the hinges the harder it is to open.
How much does a ford 4 door sedan cost?
what does a four door serdan cost
What is a proper and safe time for door to close with mechanical door closer?
5 to 9 seconds from 90 degrees
How much is an out door balcony?
cost of out door balcony
How do you adjust a Door closer to close smoothly?
i HAVE INTERNATIONAL DOOR CLOSED THAT CLOSED REALY HARD HOW CAN I MAKE IT CLOSED AMOOTLY
On a LCN door closer is there a way to control the resistance upon opening the door on a parallel mount?
If you are trying to control the amount of resistance or force required to open the door, there are two adjustments that can possibly be made. The first thing to check is the back check valve. This valve adjustment is used to cushion the door from opening too far. If this valve is adjusted improperly, the door will start to slow down too soon in the opening cycle and will be hard to open. The other adjustment is the power adjustment. This adjustment sets the spring adjustment and sizes the door closer. Adjusting the sizing spring will make the door easier to open. If you can provide me with a model number I can provide you with a link to the manufacturer's instructions for installation and adjustments. if the closer is a LCN 4040, they have a valve on the back (surface that touches the door when its mounted) that is the backcheck selection valve, it is really important when installing the door closer on a paralell mount to CLOSE the valve (turn Allen wrench to right as far in as possible until it stops) if this step was missed during installation of the LCN 4040, what you can do is open door, close both sweep and latch valves on the closer then remove the 4 mounting screws, pull closer from the door a little so you have room to get Allen wrench behind closer to close the valve, when its closed, put closer back on door and put the 4 screws back in and adjust the sweep and latch valves back to were they were, if the closer is a 4010, you will see the valves at top of closer body, these 4010's DO NOT have the backcheck selection valve. if you DO NOT close the valve when installing the closer to push side of the door, backcheck will not work because of the geometrics of the arm angles the closer's internal piston does not reach the backcheck adjustment valve and dampen opening force. if you are going to install the 4040 on push side using parallel arm, close the valve, if mounting the closer on the PULL side of door with regular arm mounting OPEN the valve (about 3 or 4 complete turns) hope this helps
Would a hydraulic door closer be best for use on doors that children go in and out of all day and why?
A hydraulic door closer would be the best choice for a door that is used by children, because it has an adjustable speed that allows you to chose how fast or slow you want the door to close, thus giving adequate time to remove little fingers and hands.
