The high pressure line is a high pressure hydraulic line. The can leak from the attachments to the fittings.
The will leak where the line is damaged
Or if it as a very old line they can crack.
How do you remove high pressure power steering hose 2000 odlsmobile intrigue
The output of a power steering pump is the high pressure side which goes to the steering box. It creates hydraulic pressure which makes steering much easier.
$20 at autozone
draing power steering fluid before changing high pressure line silverado v8
the bottom high pressure hose on the pump may need the teflon washer replaced
Replacing the hose would be best.
Power steering systems can be diagrammed into two chief components. These are the power steering pump and the rack-and-pinion steering gear. The power steering pump sends pressurized fluid into the rack which moves the gear actuating the tie-rods, which moves the wheels in the desired direction. The power steering pump has a low pressure return line and high pressure out one.
believe its the high pressure power steering hose.
High pressure line gets very hot.
No, the pressure in the power steering system is too high for the clamps to hold the hose securely.
Usually the leaks are at the high pressure line or the return line of the power steering pump. Tighten all the lines at the pump.
The power steering system works on high pressure and at idle the pump does not turn fast enough to provide full assist. It requires a higher engine rpm.