For a small amount, like spatter, of paint (latex, acrylic, or oil, top coats and primers), use a good quality hot oil treatment, followed by a regular shampoo and conditioner. That will remove any kind of paint.
For a large amount of paint, use VO5 cream (in comes in a tube) or something similar, like Brylcreem... you can find it in the men's hair conditioning section.
Or you can use olive oil, any soft margarine or shortening (or even peanut butter) if you have nothing else.
Work it into the paint and slowly and carefully break up the clumps of paint.
Very carefully pull the paint off the shaft of the hair, be patient and work slowly and carefully. Try not to use your fingernails on the shaft of the hair as it will damage the hair.
Shampoo the oil (etc) out of your hair and finish with a good conditioner.
As a last resort you may have to have a haircut... but that is a very drastic step and one I do not recommend.
In future... a hat is a must when working with any kind of paint and I often put a hot oil treatment into my hair before I start... particularly if I will be working with oil based paints.
Etch primer
reverse primer, going from stop to start codone
Small pistol small pistol primer
Yes, you can if you are sure you need to.
Primer can sometimes be sticky if it does not dry well or is put on too thick. In most cases where there is low humidity a primer should not be sticky.
In English, "primer" can refer to a tool or substance used to prepare a surface for paint, or it can also refer to a book providing basic instruction in a subject.
Etch primer
There is no "best" primer. It would depend on the condition and surface you are priming and what you are top coating the primer with,
In the simplest form of PCR, there are two types of primers used: The forward primer The reverse primer
A primer is a book of elementary principles. A writer's primer, therefore, would be the principles of writing as a craft.
to thin 2k primer or primer fillers such as dupont 1040r a raitio of 5:1 is used ie: 500mls primer to 100mls activator, if the mixture needs to be thinned, first mix the primer and activator to above ratio then add thinners at 20mls of thinners per 100mls primer mix. eg: 500mls primer +100mls activator= 600mls, 6x20mls=120mils of thinners for 600mils primer mix.
no its not
Primer - video - was created in 1989.
A primer of RNA
Primer Impacto was created in 1994.
Sylvester Primer was born in 1842.
Sylvester Primer died in 1912.