0
What else can I help you with?
When is efficiency of 3phased Induction motor maximum what is the condtion for maximum efficiency in induction motor?
It is maximum at about 75% to 100% of the motor rated load. Efficiency is maximum at unity power factor , when R=X and when variable losses Is equal to constant losses at rated load.
How many percent will be the starting current for motor?
Motor starting current is typically 5-7 times the rated current of the motor. (For three phase induction motors)
Can 3 phase induction motor work when one phase is failed?
yes the motor will rotate but less then the rated speed and more heat will be desipated
What will happen if you stop the rotor and supply is continue in induction motor?
This is done under blocker rotor test of induction motor in which the rotor of the motor is stopped by some external mechanical means and the supply is increased slowly from the autotrasformer until the rated motor current is reached and the V , I ,W readings are taken . As the rated current flows the winding temperature increases but upto rated current this temperature rise is within the safe limits . In the blocked rotor condition the rated current is achieved at around 20-25% of the rated supply voltage . If we further increase the voltage then the current flowing is more than it's rated or permissible value so windings get dengerously hot and they get burnt or damaged .
Can you make a generator out of a motor if not why not?
u can make it run but not the induction ones. For that u need to run the machine above the rated speed
What will happen if induction motor is in star-star connected?
If a motor is connected in a star configuration it will operate at a slower speed. This is the working process that a star delta starter operates on. At first through the starter the motor starts in the star connection. When the motor gets up to its highest speed in that connection it times a timer out , the star starter drops out and the delta starter pulls in and then connects the motor in the delta connection. This allows more voltage to be applied to the motor and it then speeds up to its nameplate rated RPM.
Can 3 phase induction motor start and run rated speed by 2 phase?
yes, It would run as long as the motor was not coupled to a load. Coupled to a load the motor would have no torque and would stall.
What will happen to a motor if it is supplied with lower voltage than its rated voltage?
The amperage to the motor will go higher.
Full load torque of induction motor?
The full load torque of an induction motor is the maximum torque it can produce at its rated speed when operating at full load conditions. This torque is necessary to drive the load at the desired speed under normal operating conditions. It is an important parameter to consider when selecting a motor for a specific application.
What is full load current of 2HP induction motor?
Since (in North America, at least), the horsepower of a motor describes its rated output power, you need to know its efficiency in order to determine its input power, then its rated voltage, to determine its full-load current.
What is impact ampere in 50Hz motor connected to 60Hz?
What effect will be there on the motor (Induction) output power when a 100kW 50hz motor is connected to a 60hz power supply.
What is the issues of safety requirement when dealing with high power rated three phase induction motor?
setup voltage should be only after the module leader's instruction
