Typical applications; "the motor will have a limited amount of torque, lesser in value than what is needed for normal operation. Thus, is real world workings the unit will overload, stop, not work, trip OL.
when the field winding of dc shunt motor is disconnected,the armature takes full line current and it runs very high speed
Detailed Solution. For a constant back emf, flux is inversely proportional to the speed of the motor. If field winding is disconnected accidentally, the speed would dangerously increase in order to maintain the back emf of the motor
Shunt Motor
A shunt dc motor has quite different characteristics from a series motor. Wired in series, the same current passes through the armature and the field winding and it is most unlikely that a shunt motor would have a field winding that is suitable for this. Therefore a shunt motor cannot be wired as a series motor in general because its field winding is designed for only a small current.
simply saying u that field winding is a winding present at the stator of the motor and is used to produce the magnetic field and the armature winding is the winding present in the rotor and is used to rotate the shaft of the motor. there are some machines with permanent magnets, those permanent magnets are used as the major source of magnetic flux in the machine instead of the field winding .
The synchronous motor is made self starting by providing a special winding on the rotor poles, known as damper winding or squirrel cage winding. AC supply given to the stator produces a rotating magnetic field which causes the rotor to rotate, therefore, in the beginning synchronous motor provided with damper winding starts as a squirrel cage induction motor. The exciter moves along the rotor. When the motor attains about 95%of synchronous speed, the rotor winding is connected to exciter terminals and the rotor is magnetically locked by the rotating field of the stator and the motor runs as a synchronous motor. While starting a synchronous motor, the field winding must be shorted through a suitable resistance so that the induced voltage is distributed throughout the whole winding and no part is subjected to the high voltage induced in the entire winding.
In D.C Shunt motor, the field winding is connected parallel with the armature winding.. If you remove the supply to armature winding, the motor will stop after some time.
Detailed Solution. For a constant back emf, flux is inversely proportional to the speed of the motor. If field winding is disconnected accidentally, the speed would dangerously increase in order to maintain the back emf of the motor
when the field winding of a running dc shunt motor suddenly breaks open the motor fails to run because in the motor the stationary winding is armature and rotatory is field winding
aster
The motor will be unable to function. The magnetic field will no longer exist due to the open short and there will be no latent or motive power.
Shunt Motor
A shunt dc motor has quite different characteristics from a series motor. Wired in series, the same current passes through the armature and the field winding and it is most unlikely that a shunt motor would have a field winding that is suitable for this. Therefore a shunt motor cannot be wired as a series motor in general because its field winding is designed for only a small current.
To create rotating magnetic field inside motor stator and it is done by capacitor. current drawn by motor running winding is lagging in nature when capacitor is connected in series with starting winding then the phase angle of running winding current and starting winding currents changes which creates a rotating magnetic field and motor is able to run.
110
simply saying u that field winding is a winding present at the stator of the motor and is used to produce the magnetic field and the armature winding is the winding present in the rotor and is used to rotate the shaft of the motor. there are some machines with permanent magnets, those permanent magnets are used as the major source of magnetic flux in the machine instead of the field winding .
It depends on the construction of the motor. If the field winding is connected in series with the armaturewinding, the motor is like a universal motor and will probably operate normally. If the field winding is connected in parallel with the armature, the motor will not run, but will draw current, make noise and get hot.
The synchronous motor is made self starting by providing a special winding on the rotor poles, known as damper winding or squirrel cage winding. AC supply given to the stator produces a rotating magnetic field which causes the rotor to rotate, therefore, in the beginning synchronous motor provided with damper winding starts as a squirrel cage induction motor. The exciter moves along the rotor. When the motor attains about 95%of synchronous speed, the rotor winding is connected to exciter terminals and the rotor is magnetically locked by the rotating field of the stator and the motor runs as a synchronous motor. While starting a synchronous motor, the field winding must be shorted through a suitable resistance so that the induced voltage is distributed throughout the whole winding and no part is subjected to the high voltage induced in the entire winding.