answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What will the results be if a fitting is leaking and the system is evacuated to a deep vacuum?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Physics

What describe energy?

Thermal energy is the energy and object or system has due to the movement of particles within. This results in the object or system having an internal temperature that can be measured with a thermometer.


Why does mineral oil have to be used in a disk brake?

Mineral is not the only thing used in disk brakes. Some manufacturers specify DOT brake fluid. It is most important to use EXACTLY what the manufacturer of the system calls for because using the wrong fluid in a brake system can destroy the seals in the system. This results in leaks and then you can't stop, which would be bad. Find out what your vehicle's brake system needs per the manufacturer and use only that product.


How did the elastic collision effect the total momentum and total kinetik energy in the system?

In a perfectly elastic collision total momentum and total energy remains constant. First law of physics - true everywhere even inside a black hole.


What does differential heating cause?

Differential heating causes wind because the air over one surface being warmer than the air over another results in different air pressures. Wind is caused by air moving from a high pressure system to a low pressure system. This requires differences in air pressure, which is caused by differential heating.


How do you produce high vacuum?

Achieving high vacuum is difficult because all of the materials exposed to the vacuum must be carefully evaluated for their outgassing and vapor pressure properties.Ultra high vacuum generally requires custom built equipment, strict operational procedures, and a fair amount of trial and error . Ultra high vacuum systems are usually made of stainless steel with metal gasketed conflat flanges. The system is usually baked, preferably under vacuum, to temporarily raise the vapour pressure of all outgassing materials in the system and boil them off. If necessary, this outgassing of the system can also be performed at room temperature, but this takes much more time. Once the bulk of the outgassing materials are boiled off and evacuated, the system may be cooled to lower vapour pressures to minimize residual outgassing during actual operation. Some systems are cooled well below room temperature byliquid nitrogen to shut down residual outgassing and simultaneously cryopump the system.

Related questions

What does a evacuated tube system requires?

What does the evacuation system


If a system will not hold a vacuum after it has been evacuated then?

The system is ready to be charged


Your 1997 silverado is leaking freon where can it be leaking?

Freon could be leaking anywhere in the ac system. A colored dye can be added to the system, then seen with a special light to find the leak.


What is the principle of the evacuated collection system?

asystem is evacuated when all non-condensable are removed from it in order to ensure that you have completely removed all non-condensable.


Do you need to evacuate your heatpump before you put in freon after you got a hole in the line so you fixed it?

If the system was drained, or leaked out, yes it needs evacuated.If the system was drained, or leaked out, yes it needs evacuated.


My car is leaking water?

Typically, if your car is leaking water it has to do with the air conditioning system. This simply usually means the condensation is leaking from the AC.


A leaking exhaust system can What?

Remove toxic


What causes the car to smell like fume?

That could be a leaking exhaust system. A leaking exhaust system is very dangerous! Please have it checked out ASAP.


Why would a cutlass supreme leak antifreeze from the belt system?

Hose leaking Water pump leaking


Moisture is found in an automotive air conditioning system?

This would be due to the fact that the system has a leak, it must be found and repaired then the system will need to be evacuated and recharged.......


When using a recovering system after November 15 1993 on a system containing 100 lbs of r 502 must be evacuated to?

10 inches


What is the function of cylinder exhaust?

So used gasses can be evacuated from the system in preparation for the next gas charge.