0
What else can I help you with?
When dehydrating a system it should be evacuated to the level of?
When dehydrating a system, it should be evacuated to a vacuum level of at least 500 microns (0.5 Torr) or lower. This level ensures that most of the moisture is removed, which is crucial for preventing corrosion and other issues related to moisture in the system. Achieving this vacuum level typically requires the use of a vacuum pump and proper monitoring equipment.
If a system will not hold a vacuum after it has been evacuated then?
The system is ready to be charged
What evacuated tube does not require mixing at time of collection?
red stopper/silicion coated
Where did most children get evacuated to?
they got evacuated to countrysides
Did adults get evacuated as well?
Some adults were evacuated
What evacuated tube would you use to draw for electrolytes?
red topped tube
How do you replace AC Compressor on a 98 Chevy Malibu?
By law, only an ASE certified tech working in an EPA certified shop is allowed to do this. This operation requires the AC system to be opened up, which requires the refrigerant to be evacuated from the system in a manner which prevents its release into the atmosphere and stored. Additionally, whenever an AC system is opened up, it will require the receiver-drier (if it's a Thermal Expansion Valve system) or accumulator (if it's a Fixed Orifice Tube system) to be replaced, as well.
Who discovered electrons through an evacuated glass tube?
JJ Thompson
What decreases the vacuum draw of evacuated tube?
Both time and temperature can decrease the vacuum draw of an evacuated tube. Hence the provided expiration dates and storage temperature of tubes. The vacuum of a tube will decrease if it is too old or if stored at a colder temperature than recommended.
What is the common needle gauges used for drawing blood with a evacuated tube?
21g
Is it require to mix and evacuated tube type light blue in time of collection?
No
What color tube is for blood cultures?
The yellow evacuated tubes are for blood cultures.
When collecting blood in a black top evacuated tube how full should it be?
It needs to be 100% full as the light blue tube.
When dehydrating a system it should be evacuated to the level of?
When dehydrating a system, it should be evacuated to a vacuum level of at least 500 microns (0.5 Torr) or lower. This level ensures that most of the moisture is removed, which is crucial for preventing corrosion and other issues related to moisture in the system. Achieving this vacuum level typically requires the use of a vacuum pump and proper monitoring equipment.
Where is the orifice tube located in 2002 Monte Carlo?
In a 2002 Monte Carlo, the orifice tube is located in the air conditioning system, specifically in the refrigerant line between the evaporator and the accumulator. To access it, you'll typically need to remove the accumulator and the associated components. It's important to ensure the system is properly evacuated of refrigerant before attempting to replace the orifice tube.
How do you remove air conditioner condenser 1996 aerostar?
This operation requires the refrigerant to be evacuated and recovered. By law, this must be done by an ASE certified tech in an EPA certified shop with the proper equipment to do this. Additionally, since the operation involves opening up the AC system, the receiver-drier (if it's a Thermal Expansion Valve system) or accumulator (if it's a Fixed Orifice Tube system) must also be replaced.
How do you replace the AC compressor unit in a 2002 park avenue?
As this operation requires the refrigerant to be evacuated and stored in a manner approved by the EPA, an ASE certified tech in an EPA certified shop is required by law to do this. This operation also opens up the AC system, which means that the receiver-drier (if it's a Thermal Expansion Valve system) or accumulator (if it's a Fixed Orifice Tube system) must be replaced, as well.
