I assume that you mean 'two lines', as you cannot connect anything across 'two phases'! The answer is that it depends on whether the line voltage exceeds the rated voltage of the lamp; if it does then the lamp will either burn out immediately, or have its life considerably shortened. If it doesn't then the lamp will operate normally.
d. incandescent lamp
a 100W incandescent lamp emits 120 candela.lumen is the unit for luminous intensity per steradian ,an lamp emits in all directiontherefore a 16.25watt lamp contains 19.5 lumenAnswerThe lumen is the SI unit for luminous flux -which describes the output power of visible light expressed in photometric units. The ratio of a lamp's output luminous flux to its input power is termed 'efficacy', expressed in lumens per watt. The efficacy for incandescent lamp varies from 5-15 lumens per watt. So the output of a 16.25-W incandescent lamp will be between 80-245 W.
Incandescent lamps are nearly pure resistive loads with a power factor of 1
How much what? Power? 102mW (0.102W). How much light? A filament bulb produces 1 to 3 percent of the power input as light if the proper voltage is applied. If the lamp is rated for a higher voltage, it won't get hot enough and the light out will be a lot less.
Mr. Swan or Mr. Joseph Wilson Swan is a British physicist and chemist who became famous in inventing the incandescent light bulb. He publicly demonstrated the incandescent lamp in the year 1878.
its burn that lampAnswerI assume that you mean 'two lines', as you cannot connect anything across 'two phases'! The answer is that it depends on whether the line voltage exceeds the rated voltage of the lamp; if it does then the lamp will either burn out immediately, or have its life considerably shortened. If it doesn't then the lamp will operate normally or may even be dim. It's all to do with the rated voltage of the lamp, now how it's connected!
An incandescent lamp is not cool to the touch unless it is an extremely low wattage. Heat given off by incandescent lamps is one of the drawbacks of the lamp. Total overall efficiency is reduced by the wasted heat.
An incandescent lamp can be used to check continuity of a circuit.
If the question is what wattage compact fluorescent (CFL) lamp has a similar light output to an incandescent lamp of a given wattage, the ratio is usually about 4. A 60W incandescent can be replaced by an 13-15 W CFL lamp. A 60W CFL lamp can replace a 300W incandescent lamp.
d. incandescent lamp
No, carbon dioxide is not emitted by an incandescent lamp.
a 100W incandescent lamp emits 120 candela.lumen is the unit for luminous intensity per steradian ,an lamp emits in all directiontherefore a 16.25watt lamp contains 19.5 lumenAnswerThe lumen is the SI unit for luminous flux -which describes the output power of visible light expressed in photometric units. The ratio of a lamp's output luminous flux to its input power is termed 'efficacy', expressed in lumens per watt. The efficacy for incandescent lamp varies from 5-15 lumens per watt. So the output of a 16.25-W incandescent lamp will be between 80-245 W.
The incandescent lamps are very frequently used in all the buildings !
Alexander Lodygin
The Incandescent Lamp
1859
Incandescent lamp