0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
If the running winding and the auxiliary winding were connected in series would the motor run?
no
What types names of windings does the transformer have?
The primary winding is connected to the supply. The secondary winding is connected to the load. A tertiary winding (if used) is a third winding, which may be connected in various ways.If the transformer is a three-phase transformer, then there are three common configurations: wye (also known as 'star'), delta (also known as 'mesh'), and zig-zag.
Why load is always connected to secondary of transformer?
b'coz at the secondary side large amount of current flow by recarding of active component or other ckt. which is connected to the secondary side so that ckt. is not damage or burned by flowing large amount .. load is connected at the secondary side .AnswerThe 'primary' winding of a transformer is, by definition, whichever winding is connected to the supply, whereas the 'secondary' winding is whichever winding is connected to the load. This does not mean that a load MUST be connected to a transformer, as it will work 'off load' -that is, with no load connected- without any harm.
In a double wound transformer the secondary winding is always connected to?
To the load !
What is a battery method of a single phase transformer?
Connect a VOM to one winding. Momentarily connect a battery to the other winding. When the battery makes contact, a pulse will occur on the other winding. If the pulse is positive, then the terminal connected to the plus lead is in phase with the lead connected to the battery.
The primary winding in a transformer is connected to the what?
The primary winding of a transformer is connected to the supply, while the secondary winding is connected to the load.
How can you distinguish the primary from secondaty side on a transformer?
Whichever winding is connected to the supply is the primary winding; whichever winding is connected to the load is the secondary winding.
What are the primary winding and secondary winding of a transformer?
The primary winding is the winding connected to the supply, while the secondary winding is the winding connected to the load. The terms, 'primary' and 'secondary' are unrelated to voltage levels.
What is winding transformer?
A winding is the name given each of the coils wound around the transformer's core. A basic transformer has two windings, termed the primary winding (connected to the supply) and the secondary winding (connected to the load).
How capacitor is connected in a table fan?
The Capacitor with running winding is connected in parallel with main winding.
What happens to voltage in a step down?
The voltage induced into the secondary winding will be lower than the voltage applied to the primary winding. The primary winding being the winding connected to the supply, while the secondary winding is the one connected to the load.
What is stepup transformer?
A step-up transformer produces a voltage across its secondary winding which is higher than its primary winding. The secondary winding is connected to the load, while the primary winding is connected to the supply.
If the running winding and the auxiliary winding were connected in series would the motor run?
no
What is the Working principle of auto transformer?
An autotransformer (sometimes called autoformer)[1] is an electrical transformer with only one winding. The winding has at least three electrical connection points called taps. The voltage source and the load are each connected to two taps. One tap at the end of the winding is a common connection to both circuits (source and load). Each tap corresponds to a different source or load voltage. In an autotransformer a portion of the same winding acts as part of both the primary and secondary winding. Operation he ratio of secondary to primary voltages is equal to the ratio of the number of turns of the winding they connect to. For example, connecting at the middle and bottom of the autotransformer will halve the voltage. Depending on the application, that portion of the winding used solely in the higher-voltage (lower current) portion may be wound with wire of a smaller gauge, though the entire winding is directly connected.
What is the term for the transformer winding to which the load is connected?
The load is connected to the transformer's secondarywinding, while the primary winding is connected to the supply. The terms, 'primary' and 'secondary', do NOT relate to voltage levels.
What is frog leg winding and its application?
a composite winding consisting of one lap winding and one wave winding, placed in the same slots and connected to the same commutator
Is there more current in the primary or secondary winding of a transformer?
The terms, 'primary' and 'secondary', describe how a transformer is connected and his nothing to do with which is the lower- and higher-voltage winding.The primary winding is the winding connected to the supply, while the secondary winding is the winding connected to the load. So, for astep-up transformer, the secondary winding is the higher voltage winding, whereas for a step-down transformer, the secondary winding is the lower voltage winding.For a loaded transformer, i.e. a transformer whose secondary is supplying a load, the higher-voltage winding carries the smaller current, while the lower-voltage winding carries the higher current.
