the brake
I have a 49cc korean scooter. Under the bike in front of the muffler there are colored wires. My bike has an all BLUE wire -- It needs to be cut. Once cut my bike got an extra 10-15 mph (top speed now 45 vs. 30). I was in Martha's Vinyard and went to a scooter rental place that had my particular scooter. The expert there showed me how to do it. VERY EASY and EFFECTIVE. Once the blue wire is cut you need to add a little bit of 2-stroke oil to each tank of gas due to the higher rev speed.
otawa
No, I have done before it totaly doesn't ruin it it actually helps go ton faster!!!
You can get a cut on the tongue if you eat foods that is highly made of fiber like sugar. You make it heal faster by eating lots of fruits and vegetables.
Cut them open
If the wires were cut purposely then cap and tape the ends in case they become inadvertently energized. If the wires were cut inadvertently, the wires can be butt spliced together and retaped to bring the insulation factor up to what it was before the cut.
use to cut wires piste
I have a 49cc Hyosung scooter. Under the bike in front of the muffler there are colored wires. The Hyosung bike has an all BLUE wire -- It needs to be cut. Once cut, my bike got an extra 10-15 mph (top speed now 45 vs. 30)!!!!. I was in Martha's Vinyard and went to a scooter rental place that had my particular scooter. The expert there showed me how to do it. VERY EASY and EFFECTIVE. Once the blue wire is cut you need to add a little bit of 2-stroke oil to each tank of gas due to the higher rev speed.
First test to make sure it's not the headlight it's self that is broken then check for an shortage or cut in wires if no you can cut wires strip the plastic outline that protects it and put the right colored wires back together if not take it to a mechanic and get new wires
Use a knife and cut it off
measure the length you want make a mark (usually a scratch) where you will cut, cut and when the cutting is done, file the rigid parts of the cut then when its all smooth cut a slit about a half inch on the cut part corresponding to the bars
what wire do i cut on a cdi box on a schwinn scooter 49.5cc