Want this question answered?
unscrew speakers cut of connector connect wires to speakers screw speakers in replace cover done
your wires maybe touching or the speakers are blown
You can connect external speakers on a computer on either the headphone socket or sound output sockets on the sound card. You just need the compatible connectors on the audio wires of the music system speakers to connect to these sockets. - Neeraj Sharma
it can effect the quality of the speakers :) :)
Run your power, ground, and remote wires. Then connect your RCAs to the back of your CD player and your amp, then connect your speakers to the amp..-Shocker
The speaker wires have 2 pin connectors that connect to the coaxial speakers in the doors.. If looking to upgrade speakers make sure you do research on the physical size of the new speaker as there might be issues. Also you can pick up a wire harness to connect the factory wire harness that is mounted to the door to a new set of speakers.
* simply remove the sterio * if there are wires not connected to anything, these are for extra speakers. * lengthen these wires, running them under the carpet and behind the rear seats into the boot. * now connect the wires to your speakers, ensure you have made holes to fit the speakers into the shelf. * Now wack on your bassy beats and head bang round town.
You could splice the wires but power reduction may be significant enough to where you would not hear them.
You need a series of wires and a television capable of surround sound. You can purchase a box that has outputs for forward/rear/side speakers that you connect wires to the speakers for. Sony is your best option--inexpensive and durable. I have the 6 speaker subwoofer surround.
If the TV has an audio output, connect this to a stereo amplifier, and then connect speakers to this. Modern TV's don't have amplifiers for external speakers.
there will be 2 wires one black and one red so jst connect them to your music system and enjoy listening to songs
Guillaume Casset was born on October 14, 1969.