0
What would be causing a 1993 Audi 90s to have no oil pressure I took a pressure check on the oil sending unit and had no pressure But the pump is working and there are no clogged tubes?
Wiki User
∙ 17y ago
If you checked the pressure with the sending unit in the car, it is possible the sending unit itself may be bad!
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
What is causing your coolant gauge to stop working?
Usually a faulty sending unit.
How do you check the oil pressure?
You need to remove the oil sending unit and install a oil pressure gage in it's place then start engine and read gage. Iwould tell you were the sending unit is but you did not say what you are working on. You need to remove the oil sending unit and install a oil pressure gage in it's place then start engine and read gage. Iwould tell you were the sending unit is but you did not say what you are working on. You need to remove the oil sending unit and install a oil pressure gage in it's place then start engine and read gage. Iwould tell you were the sending unit is but you did not say what you are working on.
Why does the oil pressure gauge show low oil pressure sometimes and the oil light flashes on and off in your 97 dodge 2500?
Check the oil level to make sure that it is full. The oil filter could be clogged, the oil pump could not be working properly, the oil pressure sending unit could be bad, or there is an internal engine failure.
What causes no pressure in a fuel injector?
I would suspect either a clogged fuel filter or a defective or not working fuel pump.
Your big block Chevy wont oil the rockers?
Oil level low, low oil pressure, or a clogged filter, if the bypass is not working. From there I would say maybe a clogged oil journal.
Where is the oil pressure sending unit on 1997 Buick le Sabre?
The oil pressure sending unit on a 1997 Buick LeSabre is located on the bottom side of the engine, near the oil filter. It monitors oil pressure to ensure that the pump is working properly.
How do you test the oil pressure sending unit on a 97 olds achieva 2.4 l engine?
You can test your 1997 Oldsmobile 2.4 liter engine oil pressure sending unit with a diagnostic tester. The diagnostic tester is the most reliable way to make sure your sending unit is working properly.
How do you fix a stalling 1991 Chevy Caprice?
This is a very genaralized question so here is the general answer... make sure your filter is not clogged (fuel AND air) your idle air control valve is working properly (and idle air passage is not clogged, try running a cleaner such as SeaFoam to fix this) make sure your injectors are not clogged (try using a fuel injector cleaner such as STP) and make sure your fuel pressure is where it is supposed to be at for your specific car. I need very specific information on what the car is doing and what you are doing when it stalls out to have a better idea of what is causing it to stall out.
Why the cooling system is working and there is no heat?
Maybe a clogged heater core!
How can you tell if your oil pump isn't working on a 1999 Oldsmobile silloute?
Remove oil sending unit and replace with a mechanical gauge to check actual engine oil pressure
Dead fish in vaccume clogged plunger not working?
This happened to my hamster once
Oil light is on but there is oil in the car?
Oil pressure could be the problem - OR - Oil sending unit if the oil light is on it means the oil pump is not working or faulty.it doesn't mean there is no oil.
