P0300 Diagnostic Code - Random Misfire
Symptoms.
Engine may stumble or miss
Engine may be hard to start
you may notice no issues
Cause
Failing spark plugs or spark plug wires
Bad coil or coil pack
Failing oxygen sensor(s)
Bad fuel injector or more than one
Stuck exhaust valve
Bad catalytic converter
EGR valve or valve passage clogging
Bad camshaft position sensor
Bad PCM or ECM
The Fix
Best first action is a tune up, new plugs, wires, inspect all hoses and wire connections then reset the code. If it returns you will need to narrow it down to a system, coils and coil packs should be tested, catalytic converters for function ( do you smell rotten eggs?). A misfire that jumps cylinders could indicate a lean condition, do you have any other codes along with the 300? this will help clue you in to the source, check valve function to make sure they are opening and closing fully.
This is probably pone of the most difficult codes to troubleshoot, so start with the basics and work your way into the more expensive options, in many cases a good old tune up solves the problem, back it up with a fuel system cleaning and see where you stand.
P0508 is Air Idle Control P0300 is multiple engine misfire P0032 Is O2 sensor, bank 1 sensor 1
Infinity Land was created on 2004-10-04.
Infinity Divine was created on 2004-11-16.
Zoids Infinity - Arcade - happened in 2004.
Zoids Infinity - Arcade - was created in 2004.
infinity speakers have the amp on the speaker
Trouble code P0300 means: Multiple Cylinder Misfire Trouble code P0302 means: Cylinder 2 Misfire Detected Trouble code P0303 means: Cylinder 3 Misfire Detected I would change plugs and wires
Trouble code P0171 means: Fuel Trim System Lean (Bank 1) Trouble code P0300 means: Multiple Cylinder Misfire Detected
location of crankshaft sensors in 2004 infinity M45
Live in Japan - Do As Infinity album - was created on 2004-03-21.
What kind of transmission fluid does a 2004 I-35 Infinity use?
5 quarts