0
What else can I help you with?
Where do you find the writing or mark on the rocker cover that says if your 03 Toyota hilux ute is a lpg engine or not?
google it
How do you replace a valve cover gasket on a 97 Toyota rav 4?
how do i take the rocker cover off to change the gasketon a 2001 2.7 hilux petrol
What would cause your 2001 Cadillac Catera to smoke and have a funny smell?
Rocker cover gaskets need to be replaced.
Cummins m11 rocker cover housing torque specs?
Rocker assembly 135ftlbs rocker box or housing is 35ftlbs
Where is the PCV on 1994 Toyota 2.2 RE?
The PCV valve is in the rear portion of the rocker arm cover set in a grommet with a large (10mm I.D.) hose that goes to the intake.
How do you replace accent 1.3 gi rocker cover gasket?
To replace the rocker cover gasket on a Vauxhall Astra/Opel Astra 1.3 Gi engine, first, ensure the engine is cool and disconnect the battery. Remove any necessary components, such as the air intake or ignition coils, to access the rocker cover. Unscrew the rocker cover bolts, carefully lift off the cover, and remove the old gasket. Clean the surfaces, place the new gasket in position, reassemble the rocker cover, and torque the bolts to the manufacturer's specifications.
How do you know the size of the rocker arm stud on your car?
Remove a rocker cover and measure one.
How do you adjust the roker arms on a Chevy Beretta?
To adjust the rocker arms on a Chevy Beretta, first ensure the engine is cold and remove the valve cover. Then, rotate the crankshaft to bring the piston of the cylinder you're adjusting to the top of its compression stroke. Loosen the adjustment nut on the rocker arm, then turn the adjusting screw until there's no play in the pushrod, and secure it by tightening the nut. Repeat for each rocker arm as necessary, and reassemble the valve cover when finished.
How do you Remove rocker assembly on 95 sonata?
Remove the valve cover. The rocker arm assembly can be removed by loosening the rocker arm screws. Each rocker arm will have a screw.
How do you replace rocker cover gasket on 1995 Ford Laser liata?
To replace the rocker cover gasket on a 1995 Ford Laser LXi, first, ensure the engine is cool and disconnect the battery. Remove the bolts securing the rocker cover and gently lift it off, taking care not to damage any components. Clean the mating surfaces thoroughly and place the new gasket onto the rocker cover. Reinstall the rocker cover, tighten the bolts to the specified torque, and reconnect the battery.
How do you adjust valve clearance on a 1994 Toyota Corolla?
To adjust the valve clearance on a 1994 Toyota Corolla, first, remove the valve cover to access the rocker arms. Use a feeler gauge to check the clearance between the rocker arm and the valve stem, referring to the specifications in the service manual. If adjustments are needed, loosen the lock nut on the rocker arm, then turn the adjusting screw until the desired clearance is achieved, and finally, re-tighten the lock nut. Recheck the clearance to ensure it's within the specified range before reassembling the valve cover.
Rocker arm cover gasket replacement 1998 Harley Davidson?
Subject: Sportster 1200 rear rocker coverQuestionI've replaced my front rocker cover gaskets due to an oil leak. Now I can't get the rear rocker cover off. I've removed the top bolts but the frame is blocking the removal of the cover. Is there an easy way to remove the covers?AnswerSorry I didnt answer you sooner. My hard drive decided to go south!The rocker cover will come off without removing the motor. Its a tight fit and you have to turn it to get it out, but it will come out. If you are removing the lower rocker cover you have to remove the pushrods to get it out.Good luck and happy ridingMike
