are you pushing or pulling. one direction flashes the high beams, the other clicks them on.
Hello, It sounds like you may need a new Indicator/turn signal Switch.
pull the blinker lever towards you. and they will click off
Pull back on the turn signal lever to change from high beams to low beams If the turn signal lever is pushed forward the high beams stay on and if the turn signal lever is pulled back all the way that is the " flash to pass " feature
Try pushing the high beam lever forward. In some cars pulling this towards the driver only "flashes" the high beams, like for warning another driver. To make the high beams remain on usually requires the lever to be pushed forward. Either that or you have a defective switch in the turn lever that needs to be replaced.
Check the "turn" signal switch lever for proper opeation. It should "click" when pulled back toward the s-w. The click changes/switches the "side of the lighting system-high/low. If it does NT "click", replace the "whole" lever assembly. Get one at a salvage yard to save $$$$$$$.
The high beam switch is activated by the turn signal lever on the left side of the steering wheel column. There are basically three settings - On, Off, and Flash. On is when the lever is pushed away from you, Off is with the lever in its normal position, and Flash is with the lever pulled towards you. To "flash" the high beams, pull the turn signal lever towards you. The high beams will come on for as long as you pull the lever towards you. Releasing the lever will return it to its normal position and the high beams will go off. This will work regardless of whether you have the headlights turned on or off. Among other things, flashing is good for giving someone right of way, for letting someone enter a highway, or to let another driver know that they are blinding you with their high beams! Pushing the turn signal lever away from you will cause the high beams to come on (only if the headlights are turned on at the time) and stay on until you pull the lever towards you again. When you push the lever away from you it will stay in that position until you pull it back to the middle position again. This setting is good for driving on unlit streets. When the high beam switch is activated (On or Flash) you should see a blue light on the dashboard that looks like a little headlamp.
Try pushing the turn signal lever forward away from you , it should click and turn the high beam headlights on ( if that doesn't work then I have no idea )
Pull the turn signal lever toward you to switch to high beams and back again Pull the turn signal lever toward you to switch to high beams and back again
The fuel supply is 'on' or 'off' with that lever. Turning the lever at 90 degrees to the pipe, switches fuel flow off.
Check the fuses.
pull or push the turn signal lever.
It's possible that when you turn your blinker on you are inadvertently pushing the lever forward causing your high beams to come on and stay on.