normal wear and tear. Brake light switch, bulbs or sockets.
One or more of the tail lights, head lights, or brake lights is out.
Bring to a shop that has an ABS scanner to determine the problem
i had the same problem and i replaced the sensor/switch on the brake pedal itself and got mine to work.
need to make sure power is getting to the brake light switch and abs unit
There should be a switch under the dash activated by the movement of the brake pedal arm.
A blown fuse can cause the dashlights and taillights to stop working on a 2001 Dodge 1500.
ABS and brake lights on dash will be on. Speedometer and cruise will be inoperative.ABS and brake lights on dash will be on. Speedometer and cruise will be inoperative.
The switch is likely bad. Check the power going in and out of the switch.
Fuse, bulbs, switch, wiring.
bulbs blown on high side or wiring shorted
My 2007 Dodge Ram 1500 As just shy of 78,000 miles on it with the original brakes I will be putting new brake pads and rotors in today
Warped brake rotors.
Yes, if it's the same model (1500, 2500, etc.).
My 2003 dodge ram 1500 has a 4.7L and my question is when i lock my truck the security lights like the park lights wont come off and i dont know what i did any help?
No, they will not clear the brake calipers.
No, there is not a diagram for the rear brake assembly for a 1995 Dodge Ram 1500 online. The diagram can be found in its maintenance manual bought at auto part stores.
I'm not exactly sure which fuse it is, but it doesn't sound like a fuse to me. I would check the switch on the pedal, just simply short acrost it from terminal to terminal with a screwdriver, if the brake lights come on, the switch on the pedal is bad, if they don't then it probably is a fuse.
The reverse lights are not adjustable.
One fuse block in the dash, and one under the hood
If the parking brake pedal on your 2001 Dodge Ram 1500 is stuck to the floor, you might have broken the parking brake cable. Remove the rear tires to see if the cable is still attached and replace it as needed.
I have a 2011 Dodge Ram With Camper Shell. The 3rd brake light will wok but it never goes completely out. The 3rd light remains on very dim. Check voltage with brake pedal NOT pressed and you have around 9 or 10 Volts remaining on thus connection point. Any idea why and how to wire the 3rd brake light on this vehicle./