Damage, play/wobble, squealing while in operation.
My guess would be the camshaft sensor, or idler pully, or water pump, or your compressor
idler pully is locked up,check it,change it. good luck
there is not a specific torque for the idler pully. tighten it up with a ratchet and it will not loosen up
A few things, engine not running, loose belt, or seized pully on idler/tensioner or other acc.
I would say The American International School or Jeddah Prep International School good luck
Check the idler pully.
Go to any library and borrow any Chilton manual that covers USA Domestic 2001 cars. Look in the table of contents.
You would use a 5 inch sheave.
MIT would be the wheel
A pully is used to lift heavy things you normally would have difficulty lifting with your bare hands.
For me it was the idler pully. A pretty cheap part. $15 I think. And only an hour or so to change. The problem was the bearing in it was shot. It would make a whining sound that got louder/higher pitch as the engine revved higher.
the idler pully makes the tension. to remove belt you use a wrench push tensioner in a direction that would loosen the belt as if you were trying to tighten or loosen the bolt holding the pulley on. carefull high tension.