Want this question answered?
Each line would need a surge protector so you would need 3 single-phase surge protectors.
Well for pluto to be considored a planet it would need to… …straighten out its orbit because it intersects with Neptunes orbit …Become bigger …Be closer to the sun …Dominate its moon
No. For three phase, you need a minimum of a two element meter.
The reading on the 3-ph meter would equal the sum of the three separate readings on the single-phase meters. The neutral sides of the single phase meters do not need to be connected to the neutral wire as long as they are connected together.
The current carried by the neutral of a three phase four wire system is the un balanced current. If the three phase system was completely balanced on all three phases there would be no need for a neutral, eg a three phase motor. This neutral current will be less that the phase current so a reduction in the neutral size is allowed.
No. If you have phase 1, 2, 3 (in that order), and phase 1 is the highest voltage at the instant a switching event occurs (causing a power surge), the surge voltage will be highest in phase 1. For polarity to change, you would need phase 2 to instantaneously change to greater than 1, which will not happen.
If you are happy with the way things are, then you will not feel a need for change. If you are unhappy with the way things are, then you will feel a need for change.
If you want a five-phase supply you need to start with a three-phase supply and a transformer that has 15 symmetrical cores. But why would one need a five-phase supply . . three is enough.
Each line would need a surge protector so you would need 3 single-phase surge protectors.
You will need to install a phase converter or change the motor to single phase. You can find a licensed electrician at www.contraxtor.com
No. Three phase service is something that you would need to request from your power company. You'd need to not only have service, you also need to have an electrician run 3 phase service into your home.
Swap any two phase connections. You may need to adjust the starting connections/mechanism as well.
just be what you are;you are already with the flow,in the flow and you are the flow and who watches it too!!! no change warranted; even if you change itis in the scheme of things only
There are many phase shift oscillator circuits on the internet. Google search, `phase+shift+oscillator+schematics` and `phase+shift+oscillator+diagrams`. Generally, if you want to change the phase shift characteristics, you'll need to substitute some fixed resistors with variable resistors and depending where they're placed, you can either change the operating frequency or the waveform characteristics.
Need to know the horsepower of the motor.
You probably need a 5hp or 7hp motor. Look for HP rating o the 3 phase motor and select the same for single phase. 3 phase has same power but is more efficient at electricity use. Also consider a 3 phase converter. It allows a 3 phase motor to run on single phase service.
There is no need of single phase to three phase conversions. Both service types are available from the local utility company.