gen1 and gen2 grand Cherokees 93-04. there are a few different engines
6cyl 10w30 8cyl 5w30
It does not have a Mass Airflow Sensor.
Regular unleaded.Regular unleaded.
this is located in passenger door switch
The three cables are the accelerator, transmission kick down, and cruise control.
It's on the bottom of the transfer case. It's a large white/yellowed sensor with a 2 wire connector.
well you could try disconneting you battery to reset your system if that dont work next time brake's is done have them check abs electronic conponent.
many different kinds are used.. you have 4cyl, 6cyl, 8cyl, 10cyl, 12cyl, and your w16 and w12. but your basic daily driver willl have either 4cyl or 6cyl. and also 8cyl.
Replace the crank shaft position sensor- located on the top right hand side of the bell housing. Very difficult to replace but it will do all you have described
what exactly do you need to know about the motor? I rebuilt mine last week. email me with any questions. When you email me ill send you a diagram of the motor.Is it the 6cyl or the v8? mine is a 6. mudislife2@yahoo.com
under altandtor on intake
Start the engine cold. Wait for it to warm up & squeeze the upper rad hose firmly. You will be able to tell when thermos open & feel water flow through(circulation)