If you are sharing a lane, I assume one vehicle is in front of the other, traveling in the same direction. There is no disctinction made for what type of vehicle has right of way. The vehicle behind must provide an adequate space to allow the forward vehicle to break (in other words, no tailgating) If you mean that the two vehicles are side by side in the same lane, this is never permitted.
--
My state law says you cannot deprive a motorcycle of the full use of a lane. If he's stopped waiting to turn left, for example, you can't clip by him on the shoulder if there isn't enough room.
Only the motorcycle operator himself can choose less space, by lane splitting.
There are no universal rules about the width of easements. You need to find the original grant of easement to determine the width. You should call the attorney who represented you when you purchases the property. There should be a copy of the easement with the title examination.
ALT+HO+I is what you use for width.
If you don't have enough other information about the triangle to allow you to calculate the width, then you have to use a ruler or a tape measure.
True
The standard double car garage door is 16' wide x 7' high. A two car garage should typically be a minimum of 20' wide (inside) to allow the doors to open. 22' to 24' width is preferred.
standard width should be 2'' feet for comfortabl working.
Because the perimeter is lenght + length +width +width, you do perimeter - double the width, and then halve the remaining number. that should give you the length.
The seatbelt across your chest should have about one fist width of slack.
Width depends on the wheel offset, not the lift height, the lift will allow for about a 33 inch tire, but to get width you will need a different offset and width of wheel as well.
Technically its width but if you are talking to someone they should know what you mean by thickness.
2.5 to 3.0 times of the dia of the weld rod
The width should be 1280 and the height should be 928.