3800cc
Displacement
The total displacement of all cylinders.
All engine power is based on piston displacment. Other factors enter in, such as compression, aspiration, exhaust gas pressure, but increasing displacement (cc's) determines the power available.
It's an engine with a cylinder displacement of 1.4 litres. Displacement = the volume of a cylinder multiplied by the number of cylinders. A 1.4 litre engine most likely has four cylinders, each with a volume of 0.35 litres.
Displacement is a measure of volume all the cylinders in one engine combined have. Power is what the complete engine assembly can produce when running.
cubic centimeters. it is the displacement size of the cylinders. Cubic Centimeters of displacement, or air/fuel moved through the engine in one complete revolution of the crankshaft.
this means that the displacement of volume, say water. the displacement of of the engine in the cylinders equals 1.5 litres of liquid.
Displacement and cubic inches are one in the same. Engine displacement is calculated using the bore, stroke, and number of cylinders: Displacement = [(Pi) (r^2)] [stroke] [number of cylinders] Alternatively, displacement must sometimes be defined as the total volume of air/fuel mixture an engine draws in during one complete engine cycle, howsoever defined and subject to further interpretation by taxation and racing authorities.
I assume you mean engine displacement? To calculate engine displacement, use this formula: Bore x bore x stroke x .7854 x number of cylinders.
A 2.3 liter engine has a displacement of 2.3 liters or approximately 140 cubic inches. This is measured by the combined displacement of all cylinders from top dead center to bottom dead center. Engine of this displacement range are typical four cylinder engines (most often in an inline 4 configuration), but may have more or less cylinders.
Displacement is a unit of measurement for engines. It refers to the amount of air that the cylinders move from top dead center to bottom dead center.
2700cc is the displacement of the engine. Typically, the higher the displacement, the more cylinders the engine will have. 2.7 liters (which is 2700cc) would make for a larger 4 cylinder engine, or a smaller 6 cylinder engine. Though it would be rare, it would be a good size for a 5 cylinder engine. Other configurations are possible also.