Want this question answered?
No, that is a paralel circuit. a series circuit has two paths
In any series circuit, there is one and only one path for current flow. All the current flowing in the circuit will flow through all of the devices in that circuit. A break at any point in the circuit will cause current flow to cease. Lastly, it is current that is the same at any point in the circuit where we'd care to measure it.
A series circuit is where there is only one path for the current. As a result, and as a direct consequence of Kirchoff's current law, the current at every point in a series circuit is the same. The two bulbs have the same current flowing through them.
Only if you install separate switches for each part of the circuit. The whole point of a parallel circuit - is that both parts of the circuit are controlled by the same switch.
No, they cant take multiple paths because for one component of the circuit to operate it can bypass the other components to power that one. It does not require all components to be on(like a series circuit) for just one component to operate.
Current. There is only one path that current can take through the circuit, so the current must be the same at every point.
No, that is a paralel circuit. a series circuit has two paths
In any series circuit, there is one and only one path for current flow. All the current flowing in the circuit will flow through all of the devices in that circuit. A break at any point in the circuit will cause current flow to cease. Lastly, it is current that is the same at any point in the circuit where we'd care to measure it.
A circular path that electricity flow in is called a "circuit". A circuit does not have to be circular in shape, but must begin and end at the same point like a circle does.
A series circuit is where there is only one path for the current. As a result, and as a direct consequence of Kirchoff's current law, the current at every point in a series circuit is the same.
An euler path is when you start and one point and end at another in one sweep wirthout lifting you pen or pencil from the paper. An euler circuit is simiar to an euler path exept you must start and end in the same place you started.
A series circuit is where there is only one path for the current. As a result, and as a direct consequence of Kirchoff's current law, the current at every point in a series circuit is the same. The two bulbs have the same current flowing through them.
A series circuit
Current in a series circuit travels in one path. This is because a series circuit is only one path. current in a series circuit stays the same thoughout the circuit this means that if in the beginning of the circuit there are 2 amps of current there will be the same ammount of current in the middle and in the end of it. if you don't understand this please tell me and ill explain in a better way.
No. In a series circuit, current is the same, by Kirchoff's current law, at every point in the circuit, so you either have current at every point, or you have no current at every point.
In a series circuit, components (such as resistors, bulbs, or other devices) are connected end-to-end so that there is only one path for the current to flow. Because there is only one pathway for the current, the same current passes through each component in the circuit. This principle is derived from the conservation of electric charge. Since charge cannot accumulate or disappear in a closed circuit, the current that enters a component must be equal to the current that exits that component. In other words, the flow of current is continuous and consistent throughout the series circuit. Mathematically, this can be expressed as: I_total = I_1 = I_2 = I_3 = ... = I_n Where: I_total is the total current entering the series circuit. I_1, I_2, I_3, ..., I_n are the currents through each individual component in the circuit. It's important to note that while the current remains the same throughout a series circuit, the voltage (potential difference) across each component can vary depending on its resistance or impedance, according to Ohm's Law (V = I * R).
No, they cant take multiple paths because for one component of the circuit to operate it can bypass the other components to power that one. It does not require all components to be on(like a series circuit) for just one component to operate.