The brilliant red stop light will come on
THE BRAKE LIGHT SWITCH IS NOT PUTTING OUT BATTERY WHENEVER THE BRAKE PEDAL IS PUSHED DOWN. CHECK TO SEE IF BRAKE LIGHTS COME ON WHEN BRAKE PEDAL IS PUSHED DOWN. IF BRAKE LIGHTS COME ON, THEN YOU SHOULD BE ABLE TO SHIFT IT OUT OF PARK. IF NO BRAKE LIGHTS, THEN IT WON'T SHIFT OUT OF PARK. IF THIS IS THE CASE, THEN REPLACE BRAKE LIGHT SWITCH.
Usually in every vehicle the brake lights come on when the brake pedal is pushed in. There is a switch connected to the pedal in some way to make the light switch on.
The brake light switch is out of alligment. Check on the brake pedal arm and readjust the switch.
It turns the rear brake lights on as a safety feature. The brake pedal is pushed in, causing the fluid to move forward in the brake cylinder,activating a brake light switch. Even if the vehicle is off, the lights will still come on.
I'm not exactly sure which fuse it is, but it doesn't sound like a fuse to me. I would check the switch on the pedal, just simply short acrost it from terminal to terminal with a screwdriver, if the brake lights come on, the switch on the pedal is bad, if they don't then it probably is a fuse.
Sticking Brake LightsI had this very same problem when I owned a Nissan 300zx. There is a switch in front of the brake pedal that when the brake pedal is pressed the metal part of the pedal presses down on a little button which turns the brake lights on when pressing the pedal. What I did was I got under the dash, took a flashlight and put a little piece of tape in between the pedal and the switch. It acted as a cushion because the pedal wasn't pushing down on the switch as it was pushing on the tape and when I pressed on the pedal the lights would come on but the tape pushed the pedal back to shut the switch off. If you want to avoid all this consider having your brake pedal adjusted. If your brake lights come on still consider having your cars wiring checked out.
theres a pressure switch just above brake pedal under the dash probably bad
If you step on the brake pedal , yes
you probally need to replace the bulbs
You must have a faulty brake light switch...it connects to the brake pedal...if you look up to the top of your brake pedal, you will see a little "box" with a button that is released when the pedal is pushed down. They are cheap and easy to replace.
Under the brake pedal is a brake light switch that when you press the pedal it hits it and makes your lights come on..sometimes when they get weak the pedal depresses them simply from the weight of the pedal and they stay on..Have a friend get inside the truck and pull UP on the brake pedal as you look at the lights..if the brake lights go off when they pull up on it..then it is that switch under the brake pedal
Check the switch adjustment on the brake pedal arm.