You never need to replace an oil pan unless it has been damaged and is leaking.
yes if its leaking or if u replace the oil pan
Oil pans on Hyundai vehicles are on by several mounting bolts and nuts. Once remove the gasket for the oil pan will need replacement. Replace the gasket and reinstall the oil pan.
The oil pump is located inside the engine oil pan. The oil pan will need to be dropped to access it.
The sensor screws into the side of the oil pan. You will need to drain the oil and then replace the sensor.
You need to remove the transmission oil pan. Use an oil pan to catch the old fluid that will come out. Replace the filter while the pan is off and replace the pan gasket.
You will need to remove the oil pan plug. Allow the old oil to drain out. Replace the oil pan plug and fill with new oil.
Remove the oil pan, remove the pump, and replace it.Remove the oil pan, remove the pump, and replace it.
If you have clearance just remove bolts
How hard would it be to replace oil pan on 1996 Sonoma?
You need to follow the same procedure as for timing belt replacement. But in the case of the oil pump you have to remove the oil pan too. There is a strainer attached to the oil pump from the bottom you will have remove it too. Then replace the oil pump, make sure that you have replace the oil pan gasket, and oil pump gasket.
Place a drip pan below the oil pan and oil filter. Remove the oil pan plug. Drain the oil into the oil pan. Replace the plug to the oil pan. Turn the oil filter to the left, to remove. Fill the oil filter with oil and replace it to its original position. Fill the motor with oil.
do youi have to drop oil pan to replace timing cover for 89 ford bronco