A universal motor is used to operate a food mixer.
A 120 volt motor is the inducer motor. It works the furnace.
Synchronous motor or induction motor
"Clem Motor"
Electric motor.
B16
it can go up to 200mph with a b16 tranny
I believe redline is 5,000 RPM.
B16 head with a b18c1 bottom block, and b16 or type R tranny. Also with Integra type R piston, camshaft, cams and intake manifold.
If you shift close enough to the redline, your tach should drop below as you go to the next gear. If you hit the redline, you will get fuel cutoff. It is designed to prevent you from damaging your motor.
a B16? yes as long as you can get it with the ecu, the wiring harness, transmission, and the custom motor mounts(Hasport has them)
id say about 6-8.Im running 23lbs on my motor now that's after alot of work to the motor.
b18c1, b18a1,b16 with custom or hasport motor mounts and the engine harness
No.
Because that SOHC Aint cutting it nomore and your Civic is wanting you 2 B16 motor swap it!! :)
Depends if its a 2.0l redline or a 2.2l stock ion. on the redline they are located under the center cover on top of the motor. you must remove the coils to get to the plugs. on the 2.2l idk. if its a DOHC then it is the same way.
Many Honda enthusiasts agree that the B18 is the better motor. The B18B or B18C is a better motor than the B18A. The B18 is a very good overall motor that can handle a lot of power on boost, make a pretty decent power all motor, and are high-revving.