0
It depends on the DHCP server, it could be a few days or year or more.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you request an IP address from a DHCP server in Linux?
1. dhclient -r This releases the current IP address lease 2. dhclient This requests a new IP address.
What problems occurs when dhcp server go down?
Then any computer that is turned on - while the DHCP server is down - can't get an IP address, and therefore can't communicate on the network. Also, a DHCP lease may expire - the computer got the IP address for 24 hours, for example, and the time elapses. Same problem.
What happens to a workstation with an expired IP lease?
That doesn't happen. If it does the workstation gives up the IP address and remains unconfigured until the DHCP server grants it another IP address.
What does 169.254.10.1 indicates?
169.254.10.1 is an IP address generated automatically by a computer when it is unable to lease an address from a DHCP server. It is called an Automatic Private IP Addressing (APIPA) address.
Which kind of message is sent by a DHCP client when its IP address lease has expired?
DHCPRELEASE
What is renew lease on iPad?
Renew lease is a configuration parameters for wireless network connectivity using an iPad. (And also using any device who works on a TCP/IP - DHCP "Wired" or "Wireless" network)On a DHCP (Dynamic Host Configuration Protocol) network, your device will receive a IP address as soon as you establish a communication to it. But your IP address will only being allocated to you for a certain period of time (This period of time is configured on the DHCP Server).Renew lease means that you will ask for another or longer lease of your IP address. Usally your iPad is supposed to keep the same IP address if it is still present on the target network after the lease period, because the DHCP protocol will do the procedure automatically for you.
How many days does dynamic allocation lease an IP address?
depends on DHCP server configuration ))
What DHCP options shoulld you modify for not wasting IP address?
Definitely check on the lease time; you don't want to make the lease time too long (or infinite) because that will waste IP addresses.
Can I Ping a Static IP address.?
You can ping a static or dynamic IP address. The only difference is that a static IP has been issued to a subscriber semi-permanently. A dynamic IP has something called a 'lease time', and is only valid until the lease runs out. This lease time can be minutes, hours, days, etc. When the lease runs out, the machine that was using it needs to request a new IP address. Many times the last IP address will be leased out again, unless another machine made a request and got it first. To ping any IP address with Windows, Click the Start Menu. Click Run. Type 'cmd' in the box and press enter. When you see the black prompt screen, type 'ping xxx.xxx.xxx.xxx', where xxx.xxx.xxx.xxx is the IP address you want to ping. If you have a router, you can test connection to it by pinging 192.168.1.1 in most cases, unless you have changed the router's IP address. After the ping command is finished, it will report how long the packets took to get there, how many were lost, etc. If you have a 100 percent loss rate, the ping failed, most likely due to no connection.
What is ip 0.0.0.0?
An IP address of all zeros indicates a number of things:You released the network IP from the adaptor back to DHCPYou requested an IP address from DHCP but did not receive one (older Microsoft Operating systems reported an error this way, but current versions do not)Your IP address lease expired and DHCP did not allow a renewal.Essentially it means you cannot communicate on a network.
Can a computer using dhcp have the same ip address for months?
Yes. The client will renew the same address lease for as long as the DHCP server allows.
How would you describe the DHCP leasing process?
FROM MSDNDHCP Lease ProcessA DHCP-enabled client obtains a lease for an IP address from a DHCP server. Before the lease expires, the DHCP server must renew the lease for the client or the client must obtain a new lease. Leases are retained in the DHCP server database approximately one day after expiration. This grace period protects a client's lease in case the client and server are in different time zones, their internal clocks are not synchronized, or the client is off the network when the lease expires.The DHCP lease process is a process that occurs when a computer which is a DHCP client initially boots up on the network, to provide an IP address and any additional TCP/IP configuration parameters to these clients.The terminology and concepts used when discussing DHCP leasing or the DHCP lease process is summarized below:DHCP lease: This is the amount of time for which a DHCP client is allowed to make use of a specific IP addresses. The default setting for the DHCP lease is 8 days.DHCP lease process: The process which occurs when the client initially boots up on the network. The DHCP lease process enables DHCP clients to automatically obtain IP addresses from a DHCP server.DHCP Discovery Broadcast message: This is a message sent over the network by a client computer that wants to obtain an IP address from a DHCP server.DHCP Offer message: This is message sent by DHCP servers that serves as a reply to a Discovery Broadcast message.DHCP Request Broadcast message: This message indicates that the client accepted an IP address offer from the first DHCP server which responded to it. The client broadcasts this particular message so that all the other DHCP servers that offered addresses to the client can withdraw their IP addresses.DHCP Acknowledge message: This message is sent by the DHCP server to the DHCP client, and is the process whereby which the IP address lease is assigned to the client.Unlimited lease duration: If you do not want the IP address assigned for a particular client to expire, you assign an unlimited lease duration.DHCP scopes: A scope can be defined as a set of IP addresses which the DHCP server can allocate or assign to DHCP clients. A scope contains specific configuration information for clients that have IP addresses which are within a particular scope. Scope information for each DHCP server is specific to that particular DHCP server only, and is not shared between DHCP servers. During the DHCP lease process, the DHCP scopes configured for a DHCP server is used to provide a DHCP client with an IP address.You can configure different lease duration settings for each DHCP scope.The lease duration rules which should be implemented when you determine the lease duration time for the scope of each of your subnets are:Use a shorter lease duration time if you have numerous mobile users, and if you are working in an environment that constantly has configuration changes.Use a longer lease duration time if the following statements are true:There are no mobile computersThe environment does not continually experience configuration changesIncrease the default setting of 8 days if the number of IP addresses for each subnet is by far greater than the number of DHCP devices within your environment.Use a shorter lease duration period if you have a limited number of IP addresses for each subnet, and you are near to meeting limit.Understanding the DHCP Lease ProcessThe DHCP lease process is a four-step process that occurs when a DHCP client initially boots up on the network. The DHCP process remains unchanged since its initial introduction with Windows NT 4.0. During the DHCP lease process, negotiation for an IP address occurs between a DHCP server and a client that needs to obtain an IP address. In a TCP/IP based network, to uniquely identify computers on the network, each computer must have a unique IP address. To communicate on the Internet and private TCP/IP network, all hosts defined on the network must have IP addresses. The 32-bit IP address identifies a particular host on the network. With DHCP, the system assigns IP addresses to clients, which in turn leads to less incorrect configurations of IP addresses. This is mainly due to IP configuration information being entered at one location, and the server distributing this information to clients. Duplicated IP addresses are also prevented.The DHCP lease process that occurs between the DHCP server and client is a simple process. The negotiation process for an IP address consists of four messages sent between the DHCP server and the DHCP client.Two messages from the clientTwo messages from the DHCP serverWhen the server assigns IP addresses to DHCP clients, it starts allocating addresses commencing from the bottom of its scope range, and starts moving to the top of its scope range.All unused addresses have to be used before the DHCP server:Allocates a previously used IP addresses to a new DHCP client. The DHCP server first assigns IP addresses that have not been used for the longest amount of time prior to assigning other previously used IP addresses.Allocates an expired IP addresses to a new DHCP clientDuring the four-step DHCP lease process, the events that occur are defined by the types of DHCP messages which are exchanged between the DHCP server and DHCP client:DHCPDISCOVER message: This message is used to request an IP address lease from a DHCP server. The message is sent when the client boots up on the network. The message is sent as a broadcast packet over the network, requesting for a DHCP server to respond to itDHCPOFFER message: This message is a response to a DHCPDISCOVER message, and is sent by one or numerous DHCP servers.DHCPREQUEST message: The client sends the initial DHCP server which responded to its request a DHCP Request message. The message basically indicates that the client is requesting the particular IP address for lease. The other DHCP servers who offered addresses withdraw those addresses at this point.DHCPACK message: The DHCP Acknowledge message is sent by the DHCP server to the DHCP client and is the process whereby which the DHCP server assigns the IP address lease to the DHCP client.The four steps involved in the DHCP lease process is often called DORA:DiscoverOfferRequestAcknowledge
