0
What else can I help you with?
What do you look for when the ping request fails?
ICMP Echo Request / Reply (ping) can fail when nothing is wrong because some routers do not allow it. Do a traceroute and find out how far the ping is actually making it. Focus your attention on the last hop that responds and then work your way outward. If necessary, and you have admin access to the various routers turn ICMP Echo Request / Reply on (temporarily, if so limited by policy) and see what happens. Connect to the routers along the way and check the fail logs to see if your traffic is even making it in. Since ping is not always allowed, you may need to troubleshoot with real application traffic, be it HTTP, FTP, SMTP, or whatever. You still need to get access to the routers' logs.
When you ping yahoo.com reply but your ms is very heigh?
If ping is reporting large numbers on a ping request it generally means the network is congested or there are bad connections between some of the routers in the route.
Full form of PING?
Full form of PING is: Packet InterNet Groper PING: Ping is defines as " the tools which is used to check the communication of between the systems, routers switches and also the Internet". the syntax is: ping ip address (or) ping system name (or) ping device name The abbreviation of PING is : "Packet InterNet Goopher"
Which networking command is most popularly used to test the connectivity of between systems and networks?
The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.
Are there any devices on the network that cannot ping each other?
The routers are configured with different versions of RIP. R2 is not forwarding the routing updates.
Two routers are connected via their serial ports in a lab environment The routers are configured with valid IP addresses but they cannot ping each other The show interface serial00 command shows t?
lmfao you really thought you where going to get the answer
When using the ping command how do you instruct the ping command to display statistics while in the middle of a ping operation?
Send it the SIGQUIT signal.
When you ask the technician to ping the gateway IP address 172.16.255.254 and the pings fail what is wrong?
There are a few possibilities. A successful ping indicates that you have a physical connection established, that you have a data link device in working order, and you have the IP protocol installed and configured. If you are missing any one of these the ping will fail. If you fail to get a reply from the gateway, it may simply indicate that the gateway is configured not to reply to ICMP echo requests and that nothing is wrong. You can also fail to receive replies from the gateway due to an ARP conflict (or MAC address conflict) between your system or the gateway and another system on the network.
What can verify TCP IP is installed?
TCP/IP can be verified as installed and operating by using the 'ping' command against the localhost address: ping 127.0.0.1 or ping localhost
The network administrator issues the ping 192.168.2.5 command and successfully tests connectivity to a host that has been newly connected to the network Which protocols were used during the t?
ICMP (internet control messaging protocol) is used for testing the connectivity to another machine using the ping command (packet internet gopher). The ping command sends an ICMP ECHO_REQUEST to the destination address which replies with an ICMP ECHO_RESPONSE. The response includes an indication of how far away the destination is (based on how many routers is passed through) and how long it took to get the response.
What is ping -n?
in windows if you ping an ip address, it will send 4 pings. Using -n you can vary the number of pings the command will send. For example Ping www.google.com will result in 4 replys but, ping www.google.com -n 5 will result in 5 replys. Ping /? will give you all the commands related to ping.
When using FTP what are the file navigation commands?
IPCONFIG and PING
